Connection to a personal computer, System connections, A] using usb cable – JVC GR-D201 User Manual

Page 66: B] using dv cable

Advertising
background image

Master Page: Left-start

66

EN

SYSTEM CONNECTIONS

[A] Using USB cable

It is possible to do the following things:

● Transfer still images stored on a memory card to a

PC.

● Transfer still/moving images recorded on a tape to

a PC.

● Capture still/moving images in real-time.

● Use this camcorder as a WebCam. (੬ pg. 67)

[B] Using DV cable

It is also possible to transfer still/moving images to a
PC with a DV connector by using the provided
software, software equipped with the PC or
commercially available software.
NOTES:

Refer to “SOFTWARE INSTALLATION AND USB

CONNECTION GUIDE” for the installation of the
bundled software and drivers.

The software operation manual is provided as PDF

file on the CD-ROM.

It is recommended to use the AC Adapter as the

power supply instead of the battery pack.
(

pg. 11)

Never connect the USB cable and the DV cable

simultaneously to the camcorder. Connect only
the cable you wish to use to the camcorder.

When using a DV cable, be sure to use the

optional JVC VC-VDV206U or VC-VDV204U DV
cable depending on the type of DV connector (4
or 6 pins) on the PC.

If the PC connected to the camcorder via the USB

cable is not powered, the camcorder does not
enter the USB mode.

The date/time information cannot be captured into

the PC.

Refer to the instruction manuals of the PC and

Software.

The still images can also be transferred to a PC

with a DV connector-equipped capture board.

The system may not work properly depending on

the PC or capture board you are using.

Connection To A Personal Computer

[A] Using USB cable

To USB

PC

PC with DV

connector

USB cable (provided)

[B] Using DV cable

To USB connector

To DV

connector

Core filter

Core filter

DV cable

(optional)

OR

To DV

“USB MODE” and/or “ACCESSING FILES”
appears on the LCD monitor while the PC is
accessing data in the camcorder or the camcorder
is transferring a file to the PC.
NEVER disconnect the USB cable while
“ACCESSING FILES” is displayed on the LCD
monitor since this can result in product damage.

GR-D200PAL.book Page 66 Monday, June 30, 2003 6:10 PM

Advertising