Jacuzzi HD84000 User Manual

Page 16

Advertising
background image

Luxury Whirlpool Bath

Page 16

www.jacuzzi.com

Installation and Operation

English

General Operation Information

Fill to at least 1˝ to 2˝

above highest jet

All bathtubs manufactured by Jacuzzi Luxury Bath are

designed for “fill and drain,” which means the bathtub

should be drained after each use and filled with fresh

water by the next bather. This is a health precaution,

as these bathtubs are not designed to hold water

continuously like pools or spas.
Two control panel types are available for the Luxury

Whirlpool series. Refer to details below:

J4 Luxury Electronic Control Panel:

Operational instructions for this panel is listed

below.

Optional J5 Luxury LCD Control Panel:

Operation instructions for this panel are outlined in

the supplemental guide provided in your warranty

pack. Refer to this document for complete operation

details (P/N GU47000).

Close the drain and fill the bathtub until water is at

least 1˝ to 2˝ (25mm to 51mm) above the highest jet

(see water line indicated in the illustration). Do not turn

on the whirlpool system at any time if the jets are not

completely immersed in water. Running the whirlpool

system when there is insufficient water in the bathtub

could result in water spraying outside the bath area.

Running the whirlpool system without water will damage

the recirculating pump.

When exiting the bathtub, the water level will drop

below the jets which could result in water being

sprayed out of the unit. To prevent this, you must

turn unit OFF before exiting bathtub.

J4 Control Panel

J5 Control Panel

POWER

Main Menu

ON: Press the jet button once to turn the whirlpool jets

ON.

The whirlpool motor will be on high speed. The indicator

lights at left will illuminate brightly.
OFF: Press the jet button a second time to turn the

whirlpool jets OFF.

If in chromatherapy lighting mode (indicator lights

to the left of the jet button are dim), you will need to

press jet button once to resume whirlpool operation

mode and then a second time to turn the whirlpool

power off.

Whirlpool Operation

Jet

Advertising