JVC XV-1000BK - Manual (Page 21)

19
XV-1000BK
E30580-2531A
Basic Operations
This chapter explains the basic playback common for DVD, audio CD and video CD.
The illustrations in the left column here show the buttons of the remote control unit
to be operated, however, you may use the corresponding buttons on the front panel
of the XV-1000BK.
Playing back
1. Press OPEN/CLOSE to open the disc tray.
2. Place the disc in the tray with the label side up.
ON SCREEN
/
Notes: When loading a disc in the tray, be sure to position the disc inside the recess.
Otherwise, the disc may be damaged when the tray is closed, and the disc
may not be removed from the player.
3. Press / to close the tray.
The XV-1000 starts playback from the beginning of the disc.
If a menu button appears:
Refer to “Selecting from menu items” on the next page.
To stop playback:
Press 7.
To pause playback:
Press / . Pressing it again resumes playback.
To move fast forward or fast backward:
Hold down 4 or ¢. Releasing the button returns the XV-1000BK to the
normal playback mode.
* Both fast forward and fast backward move slowly for a while and then quickly
thereafter.
* During fast forward or fast backward with a DVD disc or video CD, no audio is
output.
Some functions like fast forward or fast backward are disabled because of the
recording method of DVD discs. In this case, the functions do not work even if
the operations are done.
OPEN/CLOSE
ST OP
PLA Y/PA
USE PREVIOU S NEXT