Setting up – JVC MP-XV841US User Manual

Page 16

Advertising
background image

16

EN

2. Open the display panel

1 Slightly pull up the buckle of the Note PC,

and the display panel will be unlocked.

2 Carefully open the display panel to the desired

angle. You can open the display panel to 180
degrees.

SETTING UP

When you first use your-Mobile PC, always plug the AC power cord into the DC Input connector.

First, install the lithium-ion battery pack in the PC by following the steps below. Proceed with
the setup while the battery pack is charging. To avoid data loss due to power failure or any other
cause, check the points for battery recharging in Page 18.

1. Mounting/Dismounting the Lithium-Ion Battery Pack

1 Slide lock lever A in the direction of the arrow

( ).

2 Mount and lock the battery pack until it clicks.
3 Slide lock lever A in the direction of the arrow

( ).

1 Slide lock lever A in the direction of the arrow

( ).

2 Slide and hold lock lever B in the direction of

the arrow ( ), and pull out and dismount the
battery pack in direction 3 as shown.

SETTING UP

Mounting Battery Pack

Dismounting Battery Pack

Lock lever A

Lock lever B

Buckle

04.5.10, 2:16 PM

16

Advertising