JVC MP-XV841US - Manual (Page 76)

76
EN
Tips
In order to prevent wiretapping and unauthorized intrusions, a network key (WEP key)
may have been set for each access point. Depending on the access point, a WPA setting
with a raised security level may have been established. If a network key has been set,
input as required. For details on how to set the network key, refer to “How to Set the
Wireless LAN Functions” on page 77.
WPA : This stands for Wi-Fi Protected Access. It is designed to raise the security level
of wireless LANs. WPA changes the encryption keys dynamically to better deal
with attempts to deductively infer the encryption keys, impersonation and data
tampering.
WEP : This stands for Wired Equivalent Privacy. It refers to a technology used to prevent
wireless LAN wiretapping and unauthorized intrusions to raise security levels
by encrypting the contents of communications and transmitting the encrypted
data between computers.
7. When the computer is connected to the wireless network, the following
message appears on the task tray.
How to Shut Down the Wireless LAN Functions
1. Set the wireless LAN ON/OFF switch to OFF.
• The wireless LAN shutdown icon appears on the display for several seconds before
vanishing.
Note
In order to conserve power, it is recommended that the wireless LAN functions be shut
down while they are not in use.
HARDWARE
04.5.10, 2:07 PM 76