JVC KD-AVX11 - Manual (Page 42)

42
ENGLISH
Menu items Selectable settings, [reference page]
Input
AV Input You can determine the use of LINE IN and VIDEO IN plugs.
Off : Select when no component is connected (“AV-IN” is skipped while
selecting the source).
Audio&video : Select when connecting an AV component such as a
VCR.
Audio : Select when connecting an audio component such as a digital
audio player.
Camera * 9 : Select when connecting the rear view camera.
Camera Mirror * 9 : The mirror image of the rear view is displayed on
the monitor. (The monitor on the unit only; the normal rear view
appears on the external monitor.)
External Input When connecting an external component to the CD changer jack on the
rear.
• Not selectable when the component connected to the CD changer jack
is selected as the source.
Changer/iPod/D. Player * 10 : CD changer, iPod, D. player, etc. ☞ [28, 33]
External Input : Any other than the above. ☞ [34]
• For connecting the Bluetooth adapter/JVC DLP/XMDJVC100, this
setting is not required. It is automatically detected.
Others
Beep Off : Cancels.
On : Activates the key-touch tone.
Telephone Muting * 11 Off : Cancels.
Muting1, Muting2 : Select either one which mutes the sounds while
using the cellular phone.
Initialize Initialize all settings you have made in <AV Menu>. Press ENT, then
reset the unit (☞ page 3).
* 9 Reverse lamp lead connection is required. See Installation/Connection Manual (separate volume). The rear view
through the camera appears on the monitor in “Full” aspect ratio (regardless of the aspect ratio setting) when you
shift the gear to the reverse (R) position.
* 10 The name of the component detected through the CD changer jack is shown.
* 11 The TEL MUTING lead connection is required. See Installation/Connection Manual (separate volume).
EN35-46_KD-AVX11J-f.indd 42 EN35-46_KD-AVX11J-f.indd 42 07.3.20 10:11:47 AM 07.3.20 10:11:47 AM