References english – JVC KD-AVX11 User Manual

Page 55

Advertising
background image

55

REFERENCES

ENGLISH

Symptoms

Remedies/Causes

MP3/WMA/WAV playback

• Disc cannot be played back.

• Change the disc.
• Record the tracks using a compliant application in the

appropriate discs. (☞ page 4)

• Add appropriate extension codes to the file names.

• Noise is generated.

The track played back is not a playable file format. Skip to
another file.

• Tracks are not played back as you have

intended them to play.

Playback order may differs from the one played back using
other players.

• Elapsed playing time is not correct.

This sometimes occurs during playback. This is caused by
how the tracks are recorded.

Bluetooth

*

• Bluetooth device does not detect the unit.

This unit can be connected with one Bluetooth cellular
phone and one Bluetooth audio device at a time.
While connecting a device, this unit cannot be detected
from another device. Disconnect currently connected device
and search again.

• The unit does not detect the Bluetooth

device.

• Check the Bluetooth setting of the device.
• Search from the Bluetooth device. After the device

detects the unit, select <Open> on the unit to connect
the device. (☞ page 22)

• The unit does not make pairing with the

Bluetooth device.

• Enter the same PIN code for both the unit and target

device. If the PIN code of the device is not indicated on its
instructions, try “0000” or “1234.”

• Select the device name from <Special Device>, then

try to connect again. (☞ page 23, 45)

• Echo or noise occurs.

Adjust the position of the microphone unit.

• Phone sound quality is poor.

Move the car to place where you can get a better signal
reception.

• The sound is interrupted or skipped during

playback of a Bluetooth audio device.

• Place the Bluetooth audio device nearer to the adapter.
• Disconnect the device connected for “Bluetooth phone.”
• Turn off, then turn on the unit.
• (When the sound is not yet restored,) connect the device

again.

• The connected audio device cannot be

controlled.

Check whether the connected audio device supports AVRCP
(Audio Video Remote Control Profile).

*

For Bluetooth operations, refer also to the instructions supplied with the Bluetooth Adapter.

Continued on the next page

EN54-59_KD-AVX11J-f.indd 55

EN54-59_KD-AVX11J-f.indd 55

07.2.20 5:20:18 PM

07.2.20 5:20:18 PM

Advertising