JVC CU-VD10 - Manual (Page 6)

6
EN
Power2Go 4 is software for writing video, image, audio, and other
data files to data DVDs.
System Requirements
The following shows the system requirements for installation.
* If you use USB1.1 cable, it will take approximately 3 hours to write.
Installation Procedure
1.
Insert the installation CD-ROM in the CD-ROM drive.
2.
The language selection screen appears.
3.
The setup screen appears and then the installation start
screen appears.
Click [Next].
4.
Enter the user information and then click [Next].
Follow the on-screen instructions.
5.
Installation starts.
6.
The following screen appears when the installation is
complete.
Select the desired checkboxes and then click [Finish].
● It is recommended to select [Register now].
The installation is now finished.
NOTES:
● The above procedure is just a brief explanation on installing the
software. For details on operating Power2Go 4, refer to the User’s
guide, Help, and ReadMe installed at the same time as the software.
You can view the User's guide, Help, and ReadMe from the start menu
of the PC.
● This product does not apply to write files into CD-R or CD-RW. Also, it
is not responded to all the functions of Power2Go 4.
Writing Software — CyberLink Power2Go 4 —
Operating
system
Windows ® 2000 Professional SP4 [2000] (pre-
installed), Windows ® XP Home Edition [XP] (pre-
installed), or Windows ® XP Professional [XP] (pre-
installed)
CPU
Intel ® Pentium ® III, at least 800 MHz
(Intel ® Pentium ® 4, at least 2 GHz recommended)
Free hard disk
space At least 50 MB for installation
At least 5 GB recommended for making DVDs
RAM At least 128 MB (at least 256 MB recommended)
Connector USB 2.0/1.1* connector
Display Must be capable of displaying 800 x 600 dots
CyberLink Power2Go 4 Contact Information
For information on CyberLink Power2Go 4 or other products, use the following contact information.
Telephone/fax support
Paid voice support
Support web/e-mail
Location Language Office hours (Mon. to Fri.) Phone # Fax #
Germany English / German / French /
Spanish / Italian / Dutch
9:00 am to 5:00 pm +49-700-462-92375 +49-241-70525-25
Taiwan Mandarin 9:00 am to 6:00 pm +886-2-8667-1298
ext. 333
+886-2-8667-1300
Location Language Lines are open (Mon. to Fri.) URL
U.S.A. English 1:00 pm to 10:00 pm CST http://www.cyberlink.com/english/cs/support/
new_site/voice_support.jsp
Language URL/e-mail address
English http://www.cyberlink.com/english/cs/support/new_site/support_index.html
German / French / Spanish / Italian [email protected]
CU-VD10.book Page 6 Thursday, February 9, 2006 6:09 PM