Subsidiary settings, Mode set, Audio output – JVC DR-DX5SU User Manual

Page 70

Advertising
background image

Filename [DX5SUS_13Subsidiary.fm]

Masterpage:Left0

70

EN

Page 70Thursday, 1 September 2005 14:35

SUBSIDIARY SETTINGS

Various modes of this unit are categorized into menus nested in 2
levels shown in the following table. To change the settings of these
modes, find the desired mode in the menu (for details on each
menu, see pages 70 through 72), then follow the procedure below.

The procedure below shows how to set the desired option of the
A2ND AUDIO RECORDB mode as an example.

1

Press HDD or DVD so that the HDD or DVD lamp lights up on
the unit.

2

Press SET UP to access the Main Menu screen.

3

Press selection keys to select

AFUNCTION SET UPB, then

press

G.

4

Press selection keys to select
AREC/PLAY SET UPB, then
press

G.

5

Press selection keys to select
A2ND AUDIO RECORDB, then
press ENTER.

6

Press selection keys to select
the desired option, then press
ENTER.

7

Press SET UP to complete the setting.

* The boldface settings below indicate the settings at your purchase.

AUDIO OUTPUT

8

DIGITAL AUDIO OUT

^

DOLBY DIGITAL/PCM /

STREAM/

PCM

/ PCM ONLY

Set to the appropriate mode according to the type of the device
connected to [DIGITAL AUDIO OUT] connector.

DOLBY DIGITAL/PCM

:

Select this when you connect the digital input connector of a
Dolby Digital Decoder or an amplifier with a built-in Dolby Digital
Decoder.

STREAM/PCM

:

Select this when you connect the digital input connector of an
amplifier with a built-in DTS, Dolby Digital, or MPEG
multichannel decoder.

PCM ONLY

:

Select this when you connect the linear PCM digital input of
other audio equipment (amplifier, MD or DAT deck, etc.).

NOTES:

This setting also functions when HDD is active.

If you watch or play back a title which contains multiple audio
languages, select

APCM ONLYB in advance and choose main or

sub audio with AUDIO.

8

ANALOG AUDIO OUT

^

STEREO

/ DOLBY SURROUND

Select the appropriate setting to accommodate the unit to the
connected A/V equipment. This function takes effect when a
DVD VIDEO disc is played back.

STEREO

:

Select this when listening to conventional two-channel stereo
audio with the unit’s [AUDIO OUTPUT] connectors connected
to a stereo amplifier/receiver or TV set, or in case you want to
record the audio from a DVD VIDEO disc to a Mini Disc, etc.

DOLBY SURROUND

:

Select this when listening to multichannel surround audio with
the unit’s [AUDIO OUTPUT] connectors connected to an
amplifier/receiver with a built-in surround decoder or a surround
decoder.

8

D. RANGE CONTROL

^

NORMAL

/

WIDE RANGE / TV MODE

The dynamic range (the difference between the loudest sound and
the quietest one) can be compressed during playback of a program
encoded in Dolby Digital format.
This function takes effect when a DVD VIDEO disc recorded in
Dolby Digital format is played back at low or middle volume.

NORMAL

:

Normally select this setting to activate this function.

WIDE RANGE

:

Select this to deactivate this function when you enjoy wide
dynamic range program.

TV MODE

:

Select this when you hear the sound through the TV’s
speaker(s).

NOTES:

This function has no effect on programs other than those
recorded in Dolby Digital format.

This function does not work when Simulated Surround Effect is
activated. (A pg. 31)

The effect of

ANORMALB and AWIDE RANGEB may not be

different depending on discs.

8

OUTPUT LEVEL

^

STANDARD

/ LOW

You can lower the output level of analog audio to accommodate the
unit to the connected A/V equipment.

STANDARD

:

Normally select this setting.

LOW

:

The output level of analog audio is lowered.

Mode Set

Turn on the unit.

Turn on the TV and select the AV mode.

Slide the TV/CABLE/DBS/DVD switch to DVD.

DVD VIDEO SET UP

LANGUAGE SET (A pg. 20)
AUDIO OUTPUT (See right column)
PARENTAL LOCK (A pg. 33)
DISC PLAY SET UP (A pg. 71)

HDD/DVD/DV SET UP

HDD SET UP (A pg. 71)
DVD SET UP (A pg. 71)
DISC SET UP (A pg. 74, 75)
DV SET UP (A pg. 71)

FUNCTION SET UP

REC/PLAY SET UP (A pg. 71)
DISPLAY SET (A pg. 72)
VIDEO IN/OUT (A pg. 23, 72)

INITIAL SET UP

TUNER SET (A pg. 22)
CLOCK SET (A pg. 21)

FGDE

ENTER

AUDIO

SET UP

DVD

HDD

CABLE/DBS

DVD

TV

Selection Keys

ENTER

SELECT

SET UP

EXIT

DVD VIDEO SET UP

XP MODE REC AUDIO

HDD/DVD/DV SET UP

FUNCTION SET UP

INITIAL SET UP

REC/PLAY SET UP

DISPLAY SET

2ND AUDIO RECORD

JUMP TIME

VIDEO IN/OUT

DOLBY DIGITAL

OFF

15 MIN

THEN PRESS [ENTER]
PRESS [SET UP] TO EXIT

SELECT WITH @

DX5SUS_00.book Page 70 Thursday, September 1, 2005 2:35 PM

Advertising