JVC DR-DX5SU - Manual (Page 73)

Masterpage:Right+
EN
73
Filename [DX5SUS_13Subsidiary.fm]
SUBSIDIARY SETTINGS
Page 73Thursday, 1 September 2005 14:35
The VCR Plus+ programming system assigns a VCR Plus+ guide
channel to the TV channels and the cable channels. These guide
channel numbers are also called the VCR Plus+ channel codes.
Most TV listings have a section, usually a chart, indicating the
guide channel numbers assigned to each station.
To ensure that VCR Plus+ timer recording operates correctly, it is
necessary to set the “VCR Plus+ Guide Channel” for each station.
If you have moved to a different area or if a broadcasting station’s
channel number has been changed, perform the following steps to
set the correct guide channel number.
NOTES:
● In many instances, the VCR Plus+ guide channel numbers for
cable and broadcast TV stations DO NOT match the channel
number on which it is received by your unit or cable box. Check
your TV listing, or contact your cable supplier for details.
● Many TV stations can be viewed on cable. Check your TV listing,
or contact your cable supplier for details.
Guide Channel Number Set
1
Press HDD or DVD so that the HDD or DVD lamp lights up on
the unit.
2
Press SET UP to access the Main Menu screen.
3
Press selection keys to select AINITIAL SET UPB, then press
G.
4
Press selection keys to select
ATUNER SETB, then press G.
5
Press selection keys to select
AGUIDE CH SETB, then press
ENTER.
6
Press selection keys to select
AGUIDE CH SETB, then press
ENTER.
7
Press selection keys to select
the Guide Channel number for
the desired station as shown in
the TV listings. Then press
ENTER.
● If you receive your channels
with a cable box and if you have properly set your Controller,
ACABLE CHB appears in place of ADVD CHB.
8
Press selection keys to select ADVD CHB, then press ENTER.
Press selection keys to select the number of the unit’s channel
position on which the Guide Channel Number’s broadcast is
received by the unit or the DBS receiver. Then press ENTER.
● Repeat steps 6 – 8 as necessary.
9
Press SET UP to complete the setting.
Changing VCR Plus+ Setting
● Turn on the unit.
● Turn on the TV and select the video channel (or AV mode).
● Slide the TV/CABLE/DBS/DVD switch to DVD.
FGDE
ENTER
SET UP
HDD
DVD
CABLE/DBS
DVD TV
Selection Keys
Guide Channel Number
“Guide Channel (GUIDE CH) Number” refers to the assigned TV
station numbers, according to broadcast area, for the VCR Plus+
timer recording. The Guide Channel Numbers can be found in
most TV listings.
13 12 11
ENTER
SELECT
SET UP
EXIT
DVD VIDEO SET UP
AUTO CH SET MANUAL CH SET
HDD/DVD/DV SET FUNCTION SET UP INITIAL SET UP
TUNER SET CLOCK SET
GUIDE CH SET
THEN PRESS [ENTER]
PRESS [SET UP] TO EXIT
SELECT WITH @
13 12 11
- -
1
ENTER
SELECT
SET UP
EXIT
RETURN
GUIDE CH
CABLE CH
INITIAL SET UP > GUIDE CH SET
THEN PRESS [ENTER]
PRESS [SET UP] TO EXIT
SELECT WITH @
DX5SUS_00.book Page 73 Thursday, September 1, 2005 2:35 PM