JVC CA-UXL36V - Manual (Page 19)

– 16 –
English
CD
CD
SELECT
PREV NEXT
UP DOWN
PREV NEXT
Basic CD Operations
While playing a CD, you can do the following operations.
To stop playing for a moment
Press CD 3/8.
While pausing, the elapsed playing time
flashes on the display.
To resume playing, press CD
3/8 again.
To go to another track
Press ¢ NEXT or PREV 4
repeatedly.
•
¢ NEXT :
Skips to the beginning of the
next or succeeding tracks.
• PREV
4 :
Goes back to the beginning of
the current or previous tracks.
To go to another track directly using the number
buttons
On the remote control ONLY:
Pressing the number button(s) allows you to start playing the
track number you want.
Ex.:
For track number 5, press 5.
For track number 15, press
+10, then 5.
For track number 20, press
+10, then 10.
For track number 32, press
+10, +10, +10, then 2.
To locate a particular point in a track
During play, press and hold ¢ NEXT
or PREV
4.
•
¢ NEXT : Fast-forwards the tracks.
• PREV 4 : Fast-reverses the
tracks.
PREV NEXT
UP DOWN
PREV NEXT
To stop playing, press 7.
To remove disc, press
0 for the corresponding disc tray.
• If the CD cannot be read correctly (because it is scratched, for
example) or an unreadable CD-R or CD-RW is inserted
Playback will not start.
• If no CD is inserted
“NO DISC” appears on the display.
DO NOT try to open or close the CD tray by hand
as it will be damaged.
EN15-23_UX-L46&36[US&UJ]f 28/5/2002, 3:59 PM 16