Using the timers, Using daily timer and recording timer, English – JVC CA-UXL36V User Manual

Page 31: Press clock/timer, Set the on-time when you want the unit to turn on

Advertising
background image

– 28 –

English

Using the Timers

There are three timers available—Daily Timer, Recording
Timer and Sleep Timer.
Before using the timers, you need to set the clock built in the
unit (see page 9).

Using Daily Timer and Recording Timer

You can set the timer whether the unit is on or off.

When the on-time comes, the unit automatically turns on
(

(timer) indicator flashes just before the on-time, and

continues flashing while the timer is operating). Then, when
the off-time comes, the unit automatically turns off (on
standby).
The timer setting remains in memory until you change it.

• When the DAILY indicator is lit on the display, the timer

acts as the Daily Timer. Once the Daily Timer has been set,
it will be activated at the same time everyday until the timer
is turned off.

• When the REC indicator is lit on the display, the timer acts

as the Recording Timer. After the Recording Timer has
been performed, the details of the setting remain stored but
the timer is turned off.

Before you start...

When using “

TUNER” as the source to play, make sure to

select the desired station before turning off the power.

• There is a time limit in doing the following steps. If the

setting is canceled before you finish, start from step 1
again.

1

Press CLOCK/TIMER.

(timer) indicator lights up, and the timer

mode indicator (DAILY or REC) and the
current on-time flash on the display.
The unit enters on-time setting mode.

2

Set the on-time when you want the unit to
turn on.

1) Press UP or DOWN to set the hour, then press

CLOCK/TIMER.

2) Press UP or DOWN to set the minute, then press

CLOCK/TIMER.

The unit enters off-time setting mode.

3

Set the off-time when you want the unit to
turn off (on standby).

1) Press UP or DOWN to set the hour, then press

CLOCK/TIMER.

2) Press UP or DOWN to set the minute, then press

CLOCK/TIMER.

The unit enters source selecting mode.

4

Press UP or DOWN to select the timer mode
(Daily Timer or Recording Timer) and the
source to play, then press CLOCK/TIMER.

[DAILY

]

[DAILY

]

CLOCK
/TIMER

CLOCK/TIMER

UP

DOWN

CLOCK
/TIMER

UP

DOWN

PREV

NEXT

CLOCK/TIMER

UP

DOWN

CLOCK
/TIMER

UP

DOWN

PREV

NEXT

CLOCK/TIMER

UP

DOWN

CLOCK
/TIMER

UP

DOWN

PREV

NEXT

CLOCK/TIMER

Continued

EN24-32_UX-L46&36[US&UJ]f

28/5/2002, 4:00 PM

28

Advertising
This manual is related to the following products: