JVC XV-NA77SL - Manual (Page 6)

4
XV-NA77SL/GNT0036-002B/English
P
re
pa
ra
ti
on
s
Preparations
Connections
Before using the unit, connect the unit to a TV and/or amplifier.
Before making connections
• Do not connect the AC power cord until all other
connections have been made.
• Connect VIDEO OUT of the unit directly to the video input
of your TV. Connecting VIDEO OUT of the unit to a TV via a
VCR may cause a monitor problem when playing back a
copy-protected disc. You may also have a monitor problem
when connecting the unit to an integrated TV/Video
system.
Connecting to a TV
The following sections A to D describe TV connections where
only a TV is connected to the unit so that you will hear audio from
the TV.
A Connecting to a conventional TV
NOTES
• Be sure to connect the red and white plugs of the audio/video
cable to the FRONT RIGHT/LEFT jacks on the rear of the unit,
as shown in the illustration.
• Set [ANALOG OUT] in the [AUDIO] preference display to [2-CH
STEREO] (see page 39).
• If your TV has a monaural audio input instead of stereo, you
need to use an optional audio cable which converts stereo
audio output to monaural.
• If you use a multi-color system TV, you can play discs recorded
on both PAL and NTSC systems by setting the PAL - NTSC -
REMOTE selector to either “PAL” or “NTSC” accordingly.
• When the PAL - NTSC - REMOTE selector is set to “NTSC,” the
[NTSC] indicator lights up in the display window.
• The “REMOTE” position of the PAL - NTSC - REMOTE selector
is used to select PAL or NTSC system with the PAL/NTSC
button on the remote control unit (for details, see page 6).
• Change the PAL - NTSC - REMOTE selector position in stop
mode or with no disc inserted. The changed setting is not
effective if you change the selector position in playback mode.
• In the following description, “TV” may be substituted with
“monitor” or “projector.”
• Terminal names used for other components may be different
from those used in the following description.
RIGHT
LEFT
AUD
IO
VIDEO
IN
RIG HT
REA R
LEF T
COA XIA L
OPT ICA L
PCM /ST REA M
DIGIT AL OUT
AUD IO OUT
VID EO
S-V IDE O
Y
P B
P R
VIDEO SIGNAL SELECT
OR
AV COMPU LINK
PAL Y/C
NTSC
REM OTE
RGB /CO MP.
VIDEO OUT
COMPONENT
AV OUT
SUB -
WO OFE R
CEN TER
PAL
NTSC
REMOTE
Y/C
RGB/COMP.
Yellow
White
Audio/video cable (supplied)
White
Red
Yellow
TV
The unit
Set the PAL - NTSC - REMOTE
selector to “PAL” or “NTSC” to
match the color system of your
TV (see also the NOTES below).
Red
Set the RGB/COMP. - Y/C
selector to “RGB/COMP.”
XV-XV-NA77SL[B].book Page 4 Thursday, July 31, 2003 8:04 PM