Preparations, B connecting to a tv with an s-video jack, Pal ntsc remote y/c rgb/comp – JVC XV-NA77SL User Manual

Page 7

Advertising
background image

Preparations

5

XV-NA77SL/GNT0036-002B/English

Prep

arat

io

ns

B Connecting to a TV with an S-video jack

If your TV has an S-VIDEO input, you can get better picture
quality by connecting it with the S-VIDEO output of the unit using
an S-video cable instead of connecting the video input of the TV
to the VIDEO jack of the unit.

NOTES

• Be sure to connect the red and white plugs of the audio cable to

the FRONT RIGHT/LEFT jacks on the rear of the unit, as shown
in the illustration.

• When the RGB/COMP. - Y/C selector is set to “Y/C,” do not use

the composite video out jack. (In this case, only luminance
signal is output from the composite video out jack, resulting a
colorless picture.)

• Set [ANALOG OUT] in the [AUDIO] preference display to [2-CH

STEREO] (see page 39).

• If you use a multi-color system TV, you can play discs recorded

on both PAL and NTSC systems by setting the PAL - NTSC -
REMOTE selector to either “PAL” or “NTSC” accordingly.

• When the PAL - NTSC - REMOTE selector is set to “NTSC,” the

[NTSC] indicator lights up in the display window.

• The “REMOTE” position of the PAL - NTSC - REMOTE selector

is used to select PAL or NTSC system with the PAL/NTSC
button on the remote control unit (for details, see page 6).

• Change the PAL - NTSC - REMOTE selector position in stop

mode or with no disc inserted. The changed setting is not
effective if you change the selector position in playback mode.

RIGHT

LEFT

AUD

IO

VIDEO

S-VIDEO

IN

RIG

HT

REA

R

LEF

T

COA

XIA

L

OPT

ICA

L

PCM

/ST

REA

M

DIGIT

AL OUT

AUD

IO OUT

VID

EO

S-V

IDE

O

Y

P

B

P

R

VIDEO SIGNAL

SELECT

OR

AV COMPU LINK

PAL

Y/C

NTSC

REM

OTE

RGB

/CO

MP.

VIDEO OUT

COMPONENT

AV OUT

SUB

-

WO

OFE

R

CEN

TER

PAL

NTSC

REMOTE

Y/C

RGB/COMP.

TV

White

Red

The unit

Audio cable (supplied)

S-video cable (not supplied)

Red

White

Set the PAL - NTSC - REMOTE
selector to “PAL” or “NTSC” to
match the color system of your
TV (see also the NOTES below).

Set the RGB/COMP. - Y/C
selector to “Y/C.”

XV-XV-NA77SL[B].book Page 5 Thursday, July 31, 2003 8:04 PM

Advertising