JVC TK-C926EG - Manual (Page 53)

53
Ⅵ Set the B&W/COLOR item to AUTO
1. Select the item B&W/COLOR on the TITLE/VIDEO screen and press
the SET button.
The B&W/COLOR screen is displayed.
2.
Press the SELECTOR switch up or down ( J, K) and select MODE.
3.
Press the SELECTOR switch left or right ( H, I) and set to AUTO.
4. Press the MENU button twice.
The setting is complete and the screen returns to the main menu.
Memo:
● When near-infrared illumination is used, a B&W screen may switch to a
color screen if the object reflects light excessively. To perform switching
with higher accuracy, we recommend that you use the settings mentioned
in
AControl by B&W/Color switching signal from externalB (A Pg. 54).
● In the case of B&W/Color mode, the lens performance may cause the
image to be out of focus when the illumination of the object is near-infrared
light. In this case, use a lens that is compatible with near-infrared light.
TITLE/VIDEO
CAMERA TITLE EDIT..
W. BALANCE AWC
SHUTTER..
GAIN..
E B&W/COLOR..
BLC MODE OFF
<MENU>RETURN <SET>SUB MENU
B&W/COLOR
E MODE COLOR
AUTO LEVEL - - -
AUTO TIME - - -
<MENU>RETURN
B&W/COLOR
E MODE AUTO
AUTO LEVEL NORMAL
AUTO TIME 30s
<MENU>RETURN
TITLE/VIDEO screen
B&W/COLOR screen
TK-C925_EN.book Page 53 Thursday, November 23, 2006 4:33 PM