JVC Micro Component System UX-G200 - Manual (Page 20)

17
(2) Set the hour.
(3) Set the minutes as the hour setting above.
You cannot set On time and Off time on the same time
setting.
4
Select the playback source.
(1) Proceed to the playback source setting.
(2) Select the playback source; “CD,” “USB,” or
“TUNER”.
When you select “TUNER”
–1 Press
4/x
to select “AM PRE” or “FM PRE”,
then press TIMER.
–2 Press 4/x to select preset number, then press
TIMER.
5
Activate the Daily Timer.
The (Timer) indicator on the display and TIMER
lamp on the main unit light.
6 Turn off the System.
To deactivate the Daily Timer
When the System is turned on...
The (Timer) indicator on the display and the TIMER
lamp on the main unit go off.
• When both the Daily Timer and the Sleep Timer are
activated, the System is turned off at the earlier off-time.
PRESET TIMER
TIMER
TIMER CD MEMORY
USB FM/AM/
AUDIO IN
TIMER
How the Daily Timer works
Once the Daily Timer is set, the (Timer) indicator
lights on the display and the TIMER lamp on the main
unit lights red. The Daily Timer is activated at the same
time everyday until the timer is turned off manually.
When the on-time comes
The System turns on, tunes in to the specified station or
starts playing the specified source.
• The sound level is gradually turned up until the last
time you set. (Maximum Vol.16)
• While the Daily Timer is working, the (Timer)
indicator flashes on the display.
• Without canceling the Daily Timer, you can change the
source or adjust the volume after the Daily Timer starts
playback.
When the off-time comes
The System stops playback and turns off (standby).
• The Daily Timer setting remains in memory until you
change it.
TIMER
UX-G200[J].BOOK Page 17 Tuesday, December 2, 2008 3:05 PM