JVC 3834RV0038A - Manual (Page 13)

Installation and Setup
13
Setting the clock Manually
The clock in your VCR controls time and date
settings for your VCR.
The clock is set automatically during ACMS
(Automatic Channel Memory System) when your
VCR detects a channel that broadcasts a
Teletext signal. If the broadcast signal is weak
the clock will not be set and will require setting
manually.
1. Press i.
Press 1 or 2 to select SET.
Press OK.
The ACSS mode can be set to “OFF” by pressing
OK if you want to set the time manually.
2. Use the v v or V V on the remote control to alter the
HOURS, MINUTES, DAY, MONTH and YEAR.
Please note your VCR uses a 24 hour clock. e.g.
1pm will be displayed as 13:00.
The day of the week will appear automatically
when you enter the year.
3. If you make a mistake press 1 or 2 and enter the
correct details.
4. Press i to return to a TV picture.
To set the colour system
1. Press i.
2. The main menu will appear on the TV screen.
3. Press 1 or 2 to select the SYS and press OK.
4. Press 3 or 4 to select according to the COLOUR
system used.
5. Press 1 or 2 to select the RF AUDIO.
Press 3 or 4 to select according to the RF AUDIO
used.
6. Press i to remove the menus from the TV screen.
SYS
1 2
SET
OSD
ON
OFF
OSD f
i
AUTO
PAL
MESECAM
SYS
HH MM DD MM YY
: . . 00 1 01 05 SAB 8
ACSS : SPE.
i OK
1 2
SET
SYS
1 2
SET
OSD
ON
OFF
OSD f
i
SYS
RF-I/I
RF-B/G
RF-D/K
HH MM DD MM YY
: . . - - - - - - - - - - - - -
ACSS : ON
i OK
1 2
SET