JVC 3834RV0038A - Manual (Page 14)

14
How to using the main menu
This DVD+VCR can easily be programmed by
using the menus displayed on screen.
The menus are controlled from the Remote
Control Handset.
1. Switch on your TV set and video recorder by
pressing the 1 1/ /+ button.
2. Press i button.
The main menu will appear on the TV screen.
REC - Timer recording setting (see p. 25).
PR SET - Manual tuning setting (see p. 15).
ACMS - ACMS (Automatic Channel Memory
System) (see p. 14).
SET - Date & clock setting (see p. 13).
SYS - To set the Colour TV System (see p. 13).
(Dr.) - To check a problem with your VCR
(see p. 36).
F.OSD ON/OFF - To display the operational
mode of your VCR
(see p. 36).
(16:9/4:3) - To select the aspect ratio of your
TV (see p. 37).
DECODER - To use a pay-TV decoder (or
Satellite) with your VCR
(see p. 37).
(OPR) - To improve the playback picture
(see p. 22).
O NIC - To activate or deactivate the NICAM digital
sound (see p. 37).
Tip:
You can change the menu language on the DVD
setup menu. (See the Menu Language on page 18.)
3. Press 1 and 2 to select the desired menu.
Press OK and press 3 or 4 to select.
4. Press i to remove the menus from the TV screen.
Tuning in TV Stations
Automatically
If the TV broadcast signal is weak your VCR
may not detect the necessary information and
will not be able to store them correctly. To overcome
this problem please turn to the MANUAL TUNING
section on page 15.
1. Press 1 1/ /+ to turn on your DVD+VCR.
2. Press i button.
The main menu will appear on the TV screen.
Press 1 or 2 to select the ACMS.
Press OK.
4. Press OK to again to start the automatic tuning
process.
5. The TV STATION TABLE will appear when tuning
is completed.
Press i to save your settings.
Notes:
Please note currently only a limited number of TV
companies transmit the Programme Delivery Control
(PDC) signal which enables your DVD+VCR to suc-
cessfully identify and store them. If your DVD+VCR
has difficulty in identifying a TV station please turn the
page to find out how to manually tune in and name a
TV station. While automatic tuning is taking place the
time and date will set automatically.
If - - :- - appears in the DVD+VCR display it means
that the broadcast signal is weak and the clock was
not set. Please turn to CLOCK SET section of this
book on page 13.
SYS
1 2
SET
OSD
ON
OFF
OSD f
ACMS
Pr-12
ACMS
Pr-12
OK i
ACMS
OK i Pr-12
ACMS
01 C02 00
02 C03 00
03 C04 00
E S
i Pr-12
ACMS
BBC1
BBC2
ITV
OK i , DELETE :
MOVE :
PSET
R
02 C03 00
03 C04 00
04 C05 00
05 C06 00
06 - - - -
07 - - - -
08 - - - -
01 C02 00
BBC2
ITV
CH4
CH5
- - - - -
- - - - -
- - - - -
BBC1
SYS
1 2
SET
OSD
ON OFF
OSD f