JVC 3834RV0038A - Manual (Page 36)

36
Additional Features-VCR part
On Screen Display
You may easily display the current time or tape
counter, amount of tape left, day, month, year, day of
week, programme channel, tape speed and opera-
tional mode of your VCR will appear on the TV
screen. If a recording is taking place these On Screen
Displays will not be recorded onto the tape.
1. Press DISPLAY to display.
Press DISPLAY repeatedly to cycle through the
display options. The tape counter and amount of
tape left will appear if there is a tape loaded.
2. After 3 seconds the majority of the On Screen
Displays will clear leaving only the clock or tape
counter and the amount of tape left on the screen.
Press DISPLAY again to remove all displays from
the TV screen.
Note:
It cannot display when f.OSD is OFF.
Tape Counter Memory Stop
The Digital Tape Counter can be displayed on the
display window instead of the time by pressing
DISPLAY on the remote control. The Digital Tape
Counter indicates the relative positions of recordings
on the tape.
1. Press DISPLAY.
Press CLEAR ( ) to set the counter to 0:00:00.
Press N or start recording.
The tape counter will display the actual play time
in hours, minutes and seconds.
2. Press x when playback or recording is
complete.
Press m.
The tape will rewind and automatically stop when
the counter returns to 0:00:00.
Note:
To rewind to the beginning of the tape, press m
again.
Video Doctor (Self-Diagnosis)
This feature informs you that there is a problem with your
DVD+VCR. These error messages will appear on the TV
screen.
1. Press i.
Press 1 1 or 2 2 to select .
Press OK.
2. Press 3 3 or 4 4 to check a problem.
ANTENNA CONNECT
O PLEASE CHECK:
Connect the aerial into the jack securely.
HEAD STATUS
O PLEASE CLEAN:
Clean your video heads.
TAPE STATUS
O NOT RECORDABLE:
Insert a tape with its protection tab in place
NO. OF TIMER PROGRAMME
O 2
Shows the number of timer recording.
NEXT TIMER PROGRAMME
O PR-01 26 10:00~11:00 SP
Shows the current status of timer recording.
3. Press i to remove the menus from the TV screen.
SYS
1 2
SET
OSD
ON
OFF
OSD f
ACMS
Pr-12 PSET
R
i
ANTENNA CONNECT
PLEASE CHECK
HEAD STATUS
TAPE STATUS
NO. OF TIMER PROGRAMME
NEXT TIMER PROGRAMME