Additional features, Last scene memory, Screen saver – JVC 3834RV0038A User Manual

Page 38: Copying from dvd to vcr, Recording from another video recorder

Advertising
background image

38

Additional Features

Last Scene Memory

This player memorizes last scene from the last disc
that is viewed. The last scene remains in memory
even if you remove the disc from the player or switch
off the player. If you load a disc that has the scene
memorized, the scene is automatically recalled.

Note:

This player does not memorize the scene of a disc if you
switch off the player before commencing to play the disc.

Screen Saver

The screen saver appears when you leave the DVD
player in Stop mode for about five minutes.

Copying from DVD To VCR

This unit allows you to copy the contents of a DVD to
a VHS tape with a press of the REC (z) button.

Notes:
If the DVD you are attempting to copy is copy
protected, you may not be able to copy the disc.

1. Insert Disc

Insert the disc you wish to copy in the DVD deck
and close the disc tray.

2. Insert VHS Tape

Insert a blank VHS videotape into the VCR deck.

3. Copy the DVD to VHS Tape

Press the REC (z) button.

The DVD will go into Play mode and the VCR
will go into Record mode.
If the DVD disc menu appears, you may need
to press the Play button manually to begin
copying.

Note:
If you press the REC (z) button, be sure this unit in
DVD mode.

4. Stop the Copy Process

When the DVD is finished playing, press x to end
the copy.

You must stop the Copy process manually
when the DVD movie ends, or the unit may
replay and record over and over again.

Recording from another video
recorder

With this video recorder you can make recordings
from an external source, such as copying from
another video recorder or a camcorder.

Note:

In the following description, this video recorder will be
one used for recording and will be referred to as VCR
B. The other appliance will be used for playback and
will be referred to as VCR A.

1. VCR A should be connected to the SCART socket

on the rear panel of your unit or the AV sockets on
the front panel of your unit.

2. Insert the recorded tape into VCR A and a blank

tape into VCR B.

3. Press AUX until the socket you wish to record

from is displayed. (VCR B)

AV 1 for recording from EURO AV1 SCART socket
on the rear of your unit.
AV 2 for recording from EURO AV2 SCART socket
on the rear of your unit.
AV 3 for recording from VIDEO IN and AUDIO IN
(Left & Right) sockets on the front of your unit.

4. To start recording, press the REC (z) on VCR B

and PLAY on VCR A.

5. When you want to finish copying, press the x on

both video recorders.

VCD

CD

DVD

Advertising
This manual is related to the following products: