JVC RX-DV31 - Manual (Page 47)

42
English 7 Locating a desired chapter/track
When playing back DVD VIDEO/DVD AUDIO, you can search
for the chapter/track number to be played.
& During playback
1
Press ON SCREEN repeatedly until the on-
screen bar with pull-down menu appears on
the TV.
2
Press cursor 3 (or 2) repeatedly to move
to CHAP. or TRACK in the pull-down menu,
then press ENTER.
The following pop-up window appears under the pull-
down menu.
Ex.: When a DVD VIDEO is loaded.
Ex.: When a DVD AUDIO is loaded.
3
Press the number buttons (0 – 9) to enter the
desired chapter/track number.
Ex.: To select chapter/track number 8, press 8.
To select chapter/track number 10, press 1 then 0.
To select chapter/track number 37, press 3 then 7.
• The +10 button is not used in this function.
• You can select up to the 99th chapter/track.
• To correct a misentry
Repeat step 3 until the desired number appears in the
pop-up window.
4
Press ENTER.
The unit starts playback from the selected chapter/track.
To turn off the on-screen bar
Press ON SCREEN.
8.5Mbps DVD-VIDEO TITLE 14 TOTAL 1:25:58 CHAP 23
OFF 1/3 1/3 1/3 TIME CHAP.
CHAPTER _
TRACK _
8.5Mbps DVD-AUDIO GROUP 2 TIME 1:25:58 TRACK 3
OFF 1/3 TIME TRACK PROG. RND PAGE 1/3
7 Locating a desired position
You can start playing at your desired position by specifying
the elapsed playing time from the beginning of the current
title up to “9:59:59” (for DVD VIDEO/DVD AUDIO), or from the
beginning of the disc up to “99:59” (for VCD/SVCD/CD).
& For DVD VIDEO: During playback
For VCD/SVCD: While stopped or during
playback without PBC
For DVD AUDIO/CD: While stopped or during
playback
1
Press ON SCREEN repeatedly until the on-
screen bar with pull-down menu appears on
the TV.
2 Press cursor 3 (or 2) repeatedly to move
to in the pull-down menu, then press
ENTER.
The following pop-up window appears under the pull-
down menu.
3
Use the number buttons (0 – 9) to enter the
time.
Ex.: To play back from a point of 1 (hours): 02 (minutes):
49 (seconds) from the beginning.
Press 1
Press 0
Press 2
Press 4
Press 9
• The +10 button is not used in this function.
• You can specify the time in hours/minutes/seconds for
DVD VIDEO/DVD AUDIO, and in minutes/seconds for
VCD/SVCD/CD.
• To correct a misentry
Pressing cursor 2 erases the last entry.
Press cursor 2 repeatedly until the wrong number is
erased, then press the number buttons to enter the
correct number(s) again.
4
Press ENTER.
The unit starts playback from the specified time.
To turn off the on-screen bar
Press ON SCREEN.
8.5Mbps DVD-VIDEO TITLE 14 TOTAL 1:25:58 CHAP 23
OFF 1/3 1/3 1/3 TIME CHAP.
TIME _ : _ _ : _ _
39-48_RX-DV31SL[UW]f.p65 03.4.22, 18:58 42