GE 51209 GE Wireless Motion-Sensing Alarm with Programmable Keypad - Manual (Page 11)

11
Deactivating the Chime:
To deactivate the chime, slide the
switch to ALARM.
TESTING MOTION SENSOR OPERATION
Set alarm to CHIME mode; the chime
will sound once.
After initial chime, wait 1 seconds
and wave hand in front of the sensor.
If chime sounds immediately, sensor is
working correctly.
To turn unit off, set unit to Alarm
mode.
CARE AND MAINTENANCE
To clean the unit housing, use a soft cloth
slightly dampened with water and wipe
dry. Do not use chemical agents as this
may damage and discolor the unit.
•
1.
2.
3.