GE 51209 GE Wireless Motion-Sensing Alarm with Programmable Keypad - Manual (Page 5)


CREATING YOUR PERSONAL ALARM CODE
The -digit keypad allows you to set a
personal code for arming and disarming
the alarm.
Remove the battery compartment
screw and slide off cover in the
direction of the open arrow.
Press the LEARN button once; the
red indicator light on the front of the
alarm will blink for 1 seconds. During
this time, input your -digit code. A
beep will confirm each input. The
unit will flash a green light 3 times
to confim your new -digit code has
been saved.
Replace the cover and secure screw.
INSTALLATION
The alarm is designed to be wall mounted
with the ball and socket mount (included).
The ball and socket mount will provide the
1.
2.
3.