GE 51209 GE Wireless Motion-Sensing Alarm with Programmable Keypad - Manual (Page 8)

8
Slide switch to ALARM mode.
Arming the Alarm
Arm the alarm by pressing your -digit
code. A beep will sound after each
button is pressed.
When the -digit code is entered
correctly the unit’s indicator light
will flash green once. If entered
incorrectly, the unit will sound and
the indicator light will flash red three
times.
A red light will immediately begin to
flash indicating the -second exit
delay has started. The delay allows
time for you to leave the protected
area without triggering the alarm.
When motion is detected, the alarm
unit will sound a short tone and a red
light will flash. The alarm will activate
2.
1.
2.
3.
.