JVC ImageMixer 1.7 LYT1282-001A - Manual (Page 18)

18
EN
Master Page: Left-Heading0
M4D3+DSC_Soft_04PhotoNavi.fm Page 18
RETRIEVING STILL IMAGES FROM AN ALBUM
You can retrieve still images from an album and save them as a file.
1
Select the still image to be retrieved.
● To select more than one still image, hold down the Shift key or the Ctrl key while clicking the images.
● To select all of the still images, click [Select All] in the [Edit] menu.
2 Click [Image].
The [Image Format] dialog box appears.
3
Change the image format as desired. ( ੬ pg. 16) Then, click [OK].
● At this point, you can change the image size and picture quality as desired. (੬ pg. 16)
The [Save As] dialog box appears.
4 Specify the location where you want to save the file, enter the file name, and then click
[Save].
The image file is saved.
● If you select more than one still image in step 1, a confirmation message appears.
•If you want to save all images with the same image format and their default name, click [Yes]. The
[Auto Save Result] dialog box appears. Then, click [OK].
•If you want to set the image format and enter file name for each image, click [No]. The first image is
saved. The [Image Format] dialog box appears for the second image. Repeat steps 3 and 4 as many
times as necessary.
M4D3+DSC_Soft.book Page 18 Tuesday, December 16, 2003 2:08 PM