JVC ImageMixer 1.7 LYT1282-001A - Manual (Page 7)

EN
7
Master Page: Right-Heading0
M4D3+DSC_Soft_04PhotoNavi.fm Page 7
ADDING STILL IMAGES TO AN ALBUM (cont.)
6
Add additional still images as desired by repeating steps 3 – 5.
NOTES:
● When loading images from a memory card, never disconnect the USB cable while the message
[ACCESSING FILES] is displayed in the camcorder’s LCD monitor.
● Digital Photo Navigator can only load still images. Digital Photo Navigator cannot load video clips.
7
Click [Export].
8
Click [Album].
The [Save As] dialog box appears.
9
Specify the location where you want to save the album, enter the file name of the album,
and then click [Save].
The album is saved.
● If you save an album for the first time after the software installation, a message appears and asks if you
want to register the association of the file extension name “jia”. Then, click [Yes].
● To exit Digital Photo Navigator, refer to “EXITING DIGITAL PHOTO NAVIGATOR” (See below).
EXITING DIGITAL PHOTO NAVIGATOR
1
Click the [File] menu and then click [Exit].
● If you have already saved an album, a confirmation message appears. Then, go to step 2.
● If you have not saved an album after loading still images, a confirmation message appears.
To save an album, click [Yes]. The [Save As] dialog box appears. Specify the location where you want to
save the album, enter the file name of the album, and then click [Save]. A confirmation message
appears. Then, go to step 2.
To exit Digital Photo Navigator without saving an album, click [No]. A confirmation message appears.
Then, go to step 2.
2
Click [Yes].
Digital Photo Navigator closes.
M4D3+DSC_Soft.book Page 7 Tuesday, December 16, 2003 2:08 PM