JVC ImageMixer 1.7 LYT1282-001A - Manual (Page 40)

40
EN
Master Page: Left-Heading0
LOADING FILES FROM A MEMORY CARD THROUGH AN ADAPTER
This section is only for users equipped with D.S.C. (Digital Still Camera) features.
You can read and write files on a camcorder memory card by using an adapter (sold separately).
The following description assumes that a floppy disk adapter is being used. For details on how to use each
specific type of adapter, refer to the instructions provided with that adapter.
1 Remove the memory card from the camcorder.
2
Insert the memory card in the floppy disk adapter.
3
Insert the floppy disk adapter into the floppy disk drive of the PC.
4 Copy the necessary files from the floppy disk to the hard disk.
Floppy disk adapter
(CU-VFSD50) : For PCs that do not have a USB connector, or which are running Windows ® 95/
NT
PC card adapter
(CU-VPSD60) : For PCs with a PC card slot
USB reader/writer
(CU-VUSD70) : For applications that use numerous memory cards
M4D3+DSC_Soft.book Page 40 Tuesday, December 16, 2003 2:08 PM