JVC UX-P7 - Manual (Page 21)

– 19 –
6
Press TIMER to complete the timer
setting.
7
Press (STANDBY/ON) to turn
off the unit (on standby) if you have
set the timer with the unit turned
on.
• When the timer turns on the unit, the timer ( )
indicator and the selected timer mode indicator (DAILY
or REC) start flashing.
To cancel the setting, press and hold TIMER until the timer
(
) indicator goes off from the display.
• If the unit is turned on when the timer-on time comes
Timer does not work.
• When you unplug the AC power cord or if a power failure
occurs
The timer will be canceled. You need to set the clock first, then
the timer again.
STANDBY / ON
TIMER
SLEEP
10
Canceled
20 30 60 90 120
Using Sleep Timer
With Sleep Timer, you can fall asleep to music.
You can set Sleep Timer when the unit is turned on.
How Sleep Timer actually works
The unit automatically turns off after the specified time
length passes.
On the remote control ONLY:
1
Press SLEEP.
The time length until the shut-off time appears
and the SLEEP indicator lights up on the display.
• Each time you press the button, the time length changes
as follows:
2
Wait for about 5 seconds after specifying the
time length.
To check the remaining time until the shut-off time, press
SLEEP once so that the remaining time until the shut-off time
appears for about 5 seconds.
To change the shut-off time, press SLEEP repeatedly until
the desired time length appears on the display.
To cancel the setting, press SLEEP repeatedly until the
SLEEP indicator goes off.
• Sleep Timer is also canceled when you turn off the unit.
• If you set the Sleep Timer after Daily Timer starts playing the
selected source
Daily Timer is canceled.
• If you set the Sleep Timer after Recording Timer starts
recording
Recording Timer is canceled, but recording continues until Sleep
Timer shuts off the power.
EN16-22.UX-P7[A] 01.5.9, 11:00 AM 19