Storage, Maintenance, Air inlet net – Jonsered BB2250 User Manual

Page 17: Sholder strap

Advertising
background image

English

17

AIR INLET NET

IMPORTANT

• Blown air is taken in from the air inlet net. If the air flow drops during opera-

tion, stop the engine and inspect the air inlet net for blockage by obstacles.

• Note that failure to remove any such obstacles may result in the engine

becoming overheated and damaged.

(1) Net

WARNING

Never use the blower without the net on the blower. Before each use, check that
the net is attached in place and is free from any damage.

SHOLDER STRAP

• If the shoulder strap is damaged it may break during use, thus causing the product

to fall and resulting in personal injury. Follow the instructions below to replace the
shoulder strap with new one.

• Pass the upper end of the strap through the hanger, making the FLAPPED SIDE

OUTSIDE.

• Put the end of the strap through the ring on the strap, and then push the ring toward

the hanger as close as possible.

(1) Ring

BEFORE STORING THE BLOWER:
1. Drain the fuel tank and push the primer bulb until it becomes empty of fuel.
2. Remove the spark plug and drop a spoonful of 2-cycle oil into the cylider. Crank the engine several time and install the spark plug.
3. Store unit in a dry, cool and dark, well-ventilated, dust-free place, out of the reach of children.

Storage

F20

(1)

F21

Maintenance

BB2250_English.fm Page 17 Thursday, December 10, 2009 1:35 PM

Advertising