Warning labels on the machine, Safety, Safety first – Jonsered BB2250 User Manual

Page 4: Notes on types of warnings, Symbols, Warning labels on the machine safety

Advertising
background image

English

4

SAFETY FIRST

Instructions contained in warnings within this manual and

warning seals marked with a

symbol on the blower concern

critical points which must be taken into consideration to prevent
possible serious bodily injury, and for this reason you are
requested to read all such instructions carefully and follow them
without fail.

Notes on types of warnings

WARNING

Instructions labeled as shown above, concern critical steps
or procedures which must be followed in order to prevent
accidents which could lead to serious bodily injury or
death.This mark is used to indicate instructions which must
be followed without exception.

IMPORTANT

Instructions labeled as shown above concern steps or
procedures which, if not followed correctly, could lead to
mechanical failure, breakdown, or damage.

NOTE

Used to label supplementary instructions designed to
provide hints or directions useful in the use of the product.

Symbols

WARNING! The machine can be a dangerous
tool if used incorrectly or carelessly, which can
cause serious or fatal injury to the operator or
others.

Please read the operator’s manual carefully
and make sure you understand the
instructions before using the machine.

Always wear:
• Hearing protection
• Approved eye protection

This product is in accordance with
applicable EC directives.

Always wear protective gloves.

The blower can forcibly throw objects that
can bounce back. This can result in
serious eye injuries if the recommended
safety equipment is not used.

The blower operator must make sure
that no bystanders or animals come
nearer than 50 feet (15 meters).
Whenever several operators are
working in the same work area, they should maintain a safe
distance of at least 50 feet (15 meters) from one another.

A breathing mask should be used when
there is a risk of dust.

Keep all parts of your body away from hot
surfaces.

Noise emission to the environment according
to the European Community’s Directive. The
machine’s emission is specified in chapter
Technical data and on label.

Other symbols/decals on the machine refer to special
certification requirements for certain markets.

IMPORTANT

If the warning label peels off or becomes soiled and
impossible to read, you should contact the dealer from
which you purchased the product to order new labels and
affix them in the required location(s).

Warning labels on the machine

Safety

BB2250_English.fm Page 4 Thursday, December 10, 2009 1:35 PM

Advertising