JVC VR-609 - Manual (Page 52)

-- 52 --
VR-609
・When Recording Quality is set at HQ3, you can choose ON/OFF of "Simultaneous
Recording/ Playback". Trying to reproduce on the mode, "Simultaneous Recording/
Playback is not available. Please confirm the recording setting." will be displayed.
(When you set-up the Alarm / Motion recording mode, this unit can not execute
playback because it is on the recording stand-by mode.)
・When Recording Quality is set at HQ3, and checked "Simultaneous Recording/
Playback", Field Rate is reduced. （NTSC：30F/S、PAL：24F/S）
If the Quality is setup to HQ1, HQ2 or HQ3, the Web Browser doesn’t refresh
the live screen, and the Client Software is not connectable.
5.2.2.5 Audio Recording
5.2.2.6 Setup Days of the Week
・You can select a day to configure the recording schedule using ENTER button
and Jog dial.
The audio window can be opened by moving the cursor to the AR position bar and
pressing the ENTER button.
・Move to the Audio On check box and use the ENTER button to check/uncheck
the box. Upon enabling/disabling Audio On, press the "OK" button to confirm
the setting.
*Press the "Cancel" or EXIT button to cancel the settings.
・Audio Recording settings can be specified in the same way as recording time on a
per-hour basis. (Please refer to 5.2.2.2 How to Setup (P.50))
Move to the field indicating days of a week and press the ENTER button to display the
day selection menu.
!