JVC VR-609 - Manual (Page 85)

-- 85 --
VR-609
5.7.8 About System
5.7.7.9 Lock Front Button
・Check this to lock the front panel buttons to prevent unauthorized operation. Only
the Menu and Operation buttons will be operated.
・When you press the LOCKED button, the message "Locked!" will be displayed for
a moment.
・This is Software and Bios version of the System.
・Hour Meter indicates the passage time after DVR is on.
5.7.7.8 Remote Control Setup
! Although the Front buttons are locked, On/ Off of a VGA Output can be
changed by long pressing of a stop button and a display button simultaneously.
However, "Locked!" is displayed.
■ Wireless
■ Wired
・When the Operation Lock box is checked, all buttons except the Menu button will be
disabled. This is used to prevent erroneous operations when using the remote
controller.
・Control IDs can be set to a number between 1 - 9. (See also 7. Remote Controller
(P.93) for configuration of ID.)
・When you press the LOCKED button, the message is displayed on "Locked!" for a
moment.
・When the Operation Lock box is checked, all buttons except the Menu button will be
disabled. This is used to prevent erroneous operations when using the remote
controller. Operation of cameras is possible in this case.
・Control IDs can be set to a number between 1 - 9.
・When you press the LOCKED button, the message is displayed on "Locked!" for a
moment.