JVC VIDEO CASSETTE HR-J295EK - Manual (Page 43)

advanced features 43
Memory Stop Facility
The VCR stops automatically when rewinding the tape and the counter reaches “M 0:00:00”. If
you set the counter to “M 0:00:00” before the playback or recording, you can easily access the
pre-selected position by using the time counter.
1 Press OK repeatedly to display the counter on the TV screen.
2 Press 0000 to reset the counter before playback or recording.
3 Start playback or recording.
4 Press
1
after playback or recording. The tape rewinds and stops automatically when the
counter reaches to “M 0:00:00”.
Colour System
You can play back PAL, NTSC and MESECAM tapes, or record PAL and SECAM* signals on this
VCR. Select the appropriate colour system.
* SECAM signals will be recorded as MESECAM on this VCR; MESECAM is the designation for tapes with SECAM signals that
have been recorded on a MESECAM-compatible PAL video cassette recorder.
get to the main menu
Press MENU. Select the icon SYSTEM using the * and T buttons and
press OK.
select mode Press ^& to select the appropriate mode and press * or T.
AUTO: Normally select this. The appropriate colour system is selected automatically
depending on the playback or recording signals.
If “AUTO” does not work correctly, set the following mode manually.
PAL: To record PAL signals, or playback a PAL.
MESECAM: To record SECAM signals, or play back a MESECAM tape.
return to normal screen
Press MENU.
HR-J295EK-EN/p41-44 2/27/2, 3:15 PM 43