JVC CA-NXCDR7R - Manual (Page 54)

– 49 –
2
Press ¡ / ¢ or 4 / 1 to set the hour of the
on-time, then press SET.
3
Press
¡ / ¢ or 4 / 1 to set the minute of the
on-time, then press SET.
4
Press
¡ / ¢ or 4 / 1 to set the hour of the
off-time, then press SET.
5
Press
¡ / ¢ or 4 / 1 to set the minute of the
off-time, then press SET.
6
Press
¡ / ¢ or 4 / 1 to select the source,
then press SET.
• The source changes as follows:
FM: Tunes into an FM station.
AM: Tunes into an AM (MW/LW) station.
LINE*: Selects the external component as the source
through the currently selected input—
“ANALOG IN” or “DIGITAL IN.”
* To operate the component with the Recording Timer,
it also needs to have the timer function.
7
If you have selected “FM” or “AM” as the source in
the above step, select a preset number.
Press
¡ / ¢ or 4 / 1 to select a preset station,
then press SET.
If you have selected “LINE” as the source in the
above step, simply press SET.
The REC (Recording Timer) indicator stops flashing,
and remains lit.
REC
CD
FM AM LINE
REC
CD
REC
=
ON 0:00
=
DAILY
=
ON 0:00
=
0:00
=
Canceled
=
(back to the beginning)
REC
CD
8
Press to turn off the unit (on standby) if you
have set the timer with the unit turned on.
IMPORTANT: If you turn off the unit within 4
minutes before the timer on-time, timer recording
will not start.
To turn on or off Recording Timer after its setting is
done
1 Press CLOCK/TIMER repeatedly until “REC”
appears in the main display.
* “0:00” is the initial setting time at the factory.
2 To turn off the Recording Timer, press CANCEL to
select “REC OFF.”
The
(Timer) and REC (Recording Timer) indicators
go off from the display.
The Recording Timer is canceled, but the setting for the
Recording Timer remains in memory.
To turn on the Recording Timer, press SET.
The
(Timer) and REC (Recording Timer) indicators
light on the display. The settings you have done are
shown in the main display for your confirmation.
If you change the source or press CLOCK/TIMER
or SLEEP while a timer recording is being
performed
Recording Timer is canceled (but recording continues). The unit
does not turn off automatically.
• When you set Sleep Timer by pressing SLEEP, the unit turns
off as you set by Sleep Timer.
EN47-52_CA-NXCDR7R[B]_f 01.7.23, 10:02 AM 49