JVC XV-NP1SL - Manual (Page 11)

Basic operations
9
XV-N50BK/N55SL/LET0230-001A/English
B
a
si
c
op
er
a
tio
ns
5
Press ENTER.
The third page is shown, in which the pull-down menu of the
[DIGITAL AUDIO OUTPUT] is already open.
6
Press 5/∞ to select a desired digital output
signal type.
Set this item correctly when you connect the player to an
external surround decoder or D/A converter. See “DIGITAL
AUDIO OUTPUT” on page 28. (If you do not connect the
player to such a device, you do not have to set this item.)
• When connecting to other digital device, select
[PCM ONLY].
• When connecting to a Dolby Digital decoder, select
[DOLBY DIGITAL/PCM].
• When connecting to a Dolby Digital decoder/DTS decoder/
MPEG decorder, select [STREAM/PCM].
7
Press ENTER.
The TV screen returns to the opening display.
Basic playback
1
Press 0 (or OPEN/CLOSE on the remote
control unit) to open the disc tray.
2
Place a disc in the disc tray.
3
Press 3.
The player starts playback from the beginning.
If a menu is shown on the TV screen
When inserting a DVD VIDEO, SVCD or Video CD disc, a menu
may be shown on the TV screen. From the menu, you can select
a desired item to be played back.
For DVD VIDEO
1 Press
5/∞/2/3 to select a desired item.
2 Press ENTER.
The player starts playback of the selected item.
For SVCD/Video CD
Press the numeric buttons to select a desired item.
The player starts playback of the selected item.
NOTES
• Do not insert an unplayable disc. (See page 2.)
• When inserting a disc on the disc tray, be sure to position the
disc inside the recess. Otherwise, the disc may be damaged
when the disc tray is closed, or you may not be able to remove
the disc from the player.
To change the brightness of the display window
Press DIMMER on the remote control unit.
You can select the display window brightness from three levels,
or off.
If the brightness is set to off, nothing will be shown on the
display. In this case, the illumination lamp on the front panel is
also turned off.
SELECT
ENTER
USE 5∞23 TO SELECT, USE ENTER TO CONFIRM
DIGITAL AUDIO OUTPUT DOLBY DIGITAL/PCM
ANALOG DOWN MIX DOLBY PROLOGIC
D RANGE CONTROL ON
OUTPUT LEVEL
DVD PLAYER SET UP
OFF
PCM ONLY
DOLBY DIGITAL/PCM
STREAM/PCM
TO EXIT, PRESS CHOICE
DIGITAL AUDIO OUTPUT options
PR OG RES SIVE
• To insert an 8-cm disc, place it in the inner recess.
With the label side up
XV-NP1[B].book Page 9 Thursday, July 10, 2003 8:00 PM