JVC XV-NP1SL - Manual (Page 35)

Additional information
33
XV-N50BK/N55SL/LET0230-001A/English
A
d
d
itio
na
l
in
fo
rm
a
tio
n
Troubleshooting
Power
Power does not come on.
\ Power plug is not inserted securely. Plug in securely.
Operation
“REGION CODE ERROR!” is shown on the TV screen.
\ Region code of the inserted disc does not match the player.
Check the region code of the disc printed on the disc jacket.
Operation is not possible.
\ Microcomputer malfunction due to lightning or static electricity.
Turn off the power and unplug the power cord, then connect
the power cord again.
\ Moisture condensation caused by a sudden change of
temperature or humidity. Turn off the power, then turn it on a
few hours later.
\ The disc does not allow the operation, or an unplayable disc is
inserted. Check and replace the disc (see page 2).
[LOCK] is displayed on the display window and the disc tray
does not open.
\ When you press 0 while pressing down 7 on the player in
standby mode, the tray lock function is activated. The disc tray
cannot be opened or closed in this status. To release this
status, press
0 while pressing down 7 on the player in
standby mode.
Picture
Picture is noisy.
\ The player is connected to a VCR directly and the copyguard
function is activated. Connect the player so that the picture
signal flows directly to the TV.
\ With some discs, the picture may be blurred when [PICTURE
SOURCE] is set to [FILM] or [AUTO]. Set [PICTURE
SOURCE] to [VIDEO(NORMAL)] or [VIDEO(ACTIVE)].
Picture is blurred when you connect TV to the player using
RGB connection.
\ Set [VIDEO SIGNAL] in the [PICTURE] preference display to
[RGB] (see page 28).
Audio
DVD VIDEO disc playback sound level is lower than TV
broadcast sound level.
\ Set the [D.RANGE CONTROL] preference to [TV MODE] (see
page 28).
Analog audio output is distorted.
\ Set the [OUTPUT LEVEL] preference to [LOW] (see page 28).
The digital sound is not outputted through the player’s
DIGITAL OUT terminals.
\ Set the [DIGITAL AUDIO OUTPUT] preference to other than
[OFF] (see page 28).
MP3/WMA/JPEG/MPEG-4
No sound and/or no picture comes out.
\ MP3/WMA/MPEG-4 disc is recorded with the “packet writing
(UDF format).” It cannot be played.
\ Check the files you want to play back.
Files (tracks) are not played in the recorded order.
\ This player plays the files in the alphabetic order. So, the
playback order can vary.
WMA files cannot be played back.
\ The file is copy protected.
\ The file is recorded with a bit rate under 48 kbps. The player
does not support such WMA files.
MPEG-4 files cannot be played back.
\ The format of the file is not asf.
XV-NP1[B].book Page 33 Thursday, July 10, 2003 8:00 PM