JVC SP-UXGD7 - Manual (Page 37)

33
Timer Operations
Setting the Daily Timer
Using Daily Timer, you can wake up with your favorite
music.
You can store three Daily Timer settings; however, you can
activate only one of the timers at a time.
• To exit from the timer setting, press CLOCK/TIMER as
required.
• To correct a misentry during the process, press CANCEL.
You can return to the previous step.
1
Select one of the timer setting modes you want to set—
Daily 1 ON time, Daily 2 ON time, or Daily 3 ON time.
• When the clock has not been adjusted, pressing
CLOCK/TIMER makes the System enter the clock
setting mode (see page 19).
2
Make the timer setting as you want.
Repeat the following operations until you finish setting in
the following order—
1 Set the hour then the minute for on-time.
2 Set the hour then the minute for off-time.
3 Select the playback source—“TUNER FM,”
“TUNER AM,” “DISC,” or “AUX.”
CANCEL
CLOCK/
TIMER
SET
2
,
3
Remote control
Remote
ONLY
DAILY 1 ON (Time) ON (Time) ON (Time) DAILY 2 DAILY 3
Clock setting
(see page 19)
Canceled
Daily 1 Timer Daily 2 Timer Daily 3 Timer
Ex.: When Daily Timer 1 setting mode is selected
RDS
DISPLAY
to be continued...
UX-GD7[B]_EN.book Page 33 Wednesday, April 20, 2005 4:59 PM