JVC SP-UXGD7 - Manual (Page 8)

4
Step 3 : Hook Up
If you need more detailed information, see page 6.
SUBWOOFER
TV
DECODER
OPTICAL
DIGITAL IN
AUDIO INPUT
P b
P r
Y
VIDEO INPUT
Illustrations of the input/output terminals below are typical
examples.
When you connect other components, refer also to their
manuals, since the terminal names actually printed on the rear
may vary.
Turn off all components before connections.
Audio cord (not supplied)
Optical digital cord
(not supplied)
Component video cord
(not supplied) Red
Blue
Green
AM loop antenna (supplied)
Turn it until the best reception is
obtained.
To a wall outlet
Plug the AC power cord only after all
connections are complete.
SCART cable
(not supplied)
(No sounds come out from SCART cable.)
Do not connect Component video cord and SCART cable at one time.
UX-GD7[B]_EN.book Page 4 Wednesday, April 20, 2005 4:59 PM