S-video connection (dvd deck only), Only), Pg. 14, 15) – JVC HR-XVC33UM User Manual

Page 14: S-video connection, Dvd deck only), Installing your new unit (cont.), Connect the unit to tv, Connect the unit to power source, Set the vcr channel to off, Attention

Advertising
background image

Filename [XVC33UM_06Index.fm]

Masterpage:Left+

14

EN

Page 14

9 September 2003 9:26 am

INSTALLING YOUR NEW UNIT (cont.)

S-VIDEO

Connection

(DVD deck only)

8To connect to a TV with S-VIDEO/AUDIO input

connectors . . .

A

Connect the unit to TV.

A Connect the antenna, unit and TV as per “AV

Connection”. (

pg. 13)

B Connect the unit’s S VIDEO OUTPUT (DVD)

connector to the TV’s S-VIDEO input connector.

B

Connect the unit to power source.

Plug the end of the AC power cord into an AC outlet.

C

Set the VCR channel to off.

A When the unit is turned off, press STOP (8) on the unit

for more than 5 seconds. “3 CH” appears on the front
display panel.

B Press CH +/– on the Remote to select “– CH” (off),

then press OK.

● If Plug&Play or Tuner setting has not previously been

performed, the Language Select screen appears and Plug&Play
takes place automatically.

NOTES:

● You can obtain high-quality S-VHS pictures when you play

back discs on the DVD deck.

● If your TV is not stereo-capable, use the unit’s AUDIO

OUTPUT connectors to connect to an audio amplifier for
Hi-Fi stereo sound reproduction.

● To operate the unit with your TV using the S-VIDEO

connection, set your TV to its AV mode. You can also use the
TV/VCR button on the unit’s Remote to set your TV to the AV
mode. (

pg. 73)

● For switching the TV’s mode, refer to the instruction manual of

your television.

ATTENTION

Be sure to connect the unit’s VIDEO OUTPUT (DVD/
VCR) connector to the TV’s VIDEO input connector.

COAXIAL

OPTICAL

PCM/STREAM

TV

To S-VIDEO input

connector

AUDIO OUTPUT

S-Video cable

(not supplied)

Audio/video

cable

(not supplied)

AC outlet

AC power cord

Back of unit

RF cable

(supplied)

S VIDEO OUTPUT

Antenna or Cable

Matching transformer
(not supplied)

Coaxial cable

Flat feeder

VIDEO OUTPUT

To 75 ohm
Terminal

VHF/UHF

OUT

VHF/UHF
IN

Before performing the following steps:

● Make sure there is no cassette inserted in the unit.

● Make sure the unit is turned on, then press VCR/

DVD on the unit or VCR on the Remote so that the
VCR indicator lights up.

XVC33UM_06Index.fm Page 14 Tuesday, September 9, 2003 9:27 AM

Advertising