Pg. 80), Subsidiary settings (cont.) – JVC HR-XVC33UM User Manual

Page 80

Advertising
background image

Filename [XVC33UM_10Subsidiary.fm]

Masterpage:Left+

80

EN

Page 80

4 August 2003 6:42 pm

SUBSIDIARY SETTINGS (cont.)

8 ANALOG DOWN MIX

DOLBY SURROUND
STEREO

Set to the appropriate mode according to your audio system when you play
back a DVD VIDEO disc recorded with surround multichannel audio. This
setting affects only the analogue audio output signal from the AUDIO OUTPUT
connectors (DVD) when playing back a DVD VIDEO disc recorded with
surround multichannel audio.

DOLBY SURROUND

:

Select this when you enjoy multichannel surround audio by
connecting the unit’s analogue AUDIO OUTPUT connector
(DVD) to a surround decoder or an internal amplifier.

STEREO:

Select this when you enjoy conventional 2-channel stereo
audio by connecting the unit’s analogue AUDIO OUTPUT
connectors (DVD) to a stereo amplifier/receiver or TV, or when
you dub audio of a DVD VIDEO disc recorded with surround
audio to your MD, cassette, etc.

NOTE:

The “ANALOG DOWN MIX” function does not work when the 3D Phonic function is
activated. (

pg. 46)

8 D. RANGE CONTROL

WIDE RANGE
NORMAL
TV MODE

The dynamic range (the difference between the loudest sound and the quietest
one) can be compressed during playback of a program encoded in Dolby
Digital format.
This function takes effect when a DVD VIDEO disc recorded in Dolby Digital
format is played back at low or middle volume.

WIDE RANGE

: Select this to inactivate this function when you enjoy wide

dynamic range program.

NORMAL:

Normally select this setting to activate this function.

TV MODE

:

Select this when you hear the sound through the TV's
speaker(s).

NOTES:

● This function works only when playing back a disc recorded with Dolby Digital format.

The setting is not effective for other discs.

● This function does not work when the 3D Phonic function is activated. (

pg. 46)

8 OUTPUT LEVEL

STANDARD
LOW

You can lower the output level of analog audio to accommodate the unit to the
connected A/V equipment.

STANDARD: Normally select this.
LOW

:

The output level of analog audio is lowered.

XVC33UM_01.book Page 80 Monday, August 4, 2003 7:24 PM

Advertising