JVC SP-UXV100 - Manual (Page 16)

12
Playing at Random
The tracks will play in no particular order when you use this mode.
Press the RANDOM button on the Remote
Control.
The RANDOM indicator lights up on the display, and tracks will
be played in random order.
To skip a track during playback, press the ¢ button (or the
>/UP button on the Remote Control) to jump to the next randomly
selected track. Press the
4 button (or the </DOWN button on the
Remote Control) to jump back to the start of a track being played.
To exit from Random Play mode, press the 7 button.
Repeating Tracks
You can set the program or individual track currently playing to
repeat as many times as you like.
Press the REPEAT button on the Remote
Control.
The Repeat indicator changes at each press of the button, as shown
below.
: Repeats one track.
ALL : In Normal Play mode, repeats all the tracks.
In Program Play mode, repeats all the tracks in
the program.
In Random Play mode, repeats all the tracks in
random order.
To exit from Repeat mode, press the REPEAT button until the
Repeat indicator on the display goes out.
■ In Random Play
cannot be selected.
■ Repeat mode remains in effect even when you change the play
mode.
ALL
blank display
Locking the CD cover
You can lock the CD cover and prohibit to unload the CD.
•
This operation is possible only using the buttons on the unit.
To prohibit unloading the CD, press the button while
holding the 7 button. (If the CD cover is opened, close it first.)
“LOCKED” appears for a while, and the CD cover is locked.
To cancel the prohibition and unlock the CD cover, press
the button while holding the 7 button.
“UNLOCKED” appears for a while, and the CD cover is unlocked.
Note: If you try to unload the CD, “LOCKED” appears to inform
you that the CD cover is locked.
EN10-22.UX-V100[B]f 12/12/00, 12:33 PM 12