Jaguar XK8 - Manual (Page 16)

User Instructions
15 DATE OF ISSUE: OCTOBER 1996
XK8 Range 1997 User Instructions
S L R
FC2S LF1AR BT1CS FC2S
EM2AR
(EM1AR) BT1AL
Grounds
HARNESS CODE + GROUND STUD NUMBER + EYELET STUD POSITION (A,B,C) + EYELET DESIGNATION (S,L,R)
Eyelet stud position
There may be up to three eyelets on one stud. A, B and C are used to indicate the position of the eyelet on the stud:
A – first (bottom), B – second (middle), C – third (top).
Eyelet designation
Two eyelet variations are used: a single eyelet and an eyelet pair. The single eyelet has a single ‘leg’, which is identi-
fied by an S; the eyelet pair has two ‘legs’, identified as L (left) or R (right).
SINGLE EYELET EYELET PAIR
EXAMPLES:
Harness code
Ground stud number
Single leg eyelet
Harness code
Ground stud number
RH leg of eyelet
First eyelet on stud
Harness code
Ground stud number
Single leg eyelet
Third eyelet on stud
Where the ground designation differs from LHD to RHD, the RHD ground is shown in parentheses. If the ground
designation is the same for LHD and RHD, only one ground designation is used.
EXAMPLES:
LHD Vehicles
RHD Vehicles
Same for LHD & RHD Vehicles