JVC KD-BT22 - Manual (Page 19)

ENGLISH
17 OPERATIONS
Continued on the next page
4
Enter a PIN (Personal Identification Number)
code to the unit.
• You can enter any number you like (1-digit to
16-digit number). [Initial: 0000]
• To enter a PIN code less than 4-digit, firstly
delete the initial PIN code (0000) by pressing
number button 5 (
).
* Some devices have their own PIN code. Enter the
specified PIN code to the unit.
1 Move to the next (or previous) number
position.
2 Select a number.
3 Repeat steps 1 and 2 until you finish
entering a PIN code.
4 Confirm the entry.
5
Operate the target Bluetooth device, (while
“Open...” is flashing on the display).
On the device to be connected, enter the same PIN
code you have just entered for this unit.
“Connecting...” flashes, then “Pairing Ok” or
“Connected [Device Name]” appears on the display
when the connection is established. Now you can
use the device through the unit.
appears when the connection is established.
The device remains registered even after you
disconnect the device. Use “Cnnct Phone” or
“Cnnct Audio” (or activate “Auto Cnnct”) to
connect the same device from next time on. (See
the following and pages 36 and 37.)
Deleting a registered device
Perform steps 1 and 2 on page 16, then...
1 Select “Del Pairing.”
2 Select a device you want to delete.
3 Delete the selection.
• Press number button 3 to select “No” or return to
step 1 .
Connecting a registered device
Perform steps 1 and 2 on page 16, then...
1 Select “Cnnct Phone” or “Cnnct Audio.”
2 Select a device you want.
“Connecting...” flashes, then “Connected (and
device name)” appears on the display when the
device is connected.
OPERAŢII
Introduceţi un cod PIN (Număr de identificare
personal) în aparat.
• Puteţi introduce orice număr doriţi (număr cu 1-16
cifre). [Setare iniţială: 0000]
• Pentru a introduce un cod PIN cu mai puţin de 4 cifre,
mai întâi ştergeţi codul PIN iniţial (0000) apăsând
tasta numerică 5 ENGLISH
17 OPERATIONS
Continued on the next page
4
Enter a PIN (Personal Identification Number)
code to the unit.
• You can enter any number you like (1-digit to
16-digit number). [Initial: 0000]
• To enter a PIN code less than 4-digit, firstly
delete the initial PIN code (0000) by pressing
number button 5 (
).
* Some devices have their own PIN code. Enter the
specified PIN code to the unit.
1 Move to the next (or previous) number
position.
2 Select a number.
3 Repeat steps 1 and 2 until you finish
entering a PIN code.
4 Confirm the entry.
5
Operate the target Bluetooth device, (while
“Open...” is flashing on the display).
On the device to be connected, enter the same PIN
code you have just entered for this unit.
“Connecting...” flashes, then “Pairing Ok” or
“Connected [Device Name]” appears on the display
when the connection is established. Now you can
use the device through the unit.
appears when the connection is established.
The device remains registered even after you
disconnect the device. Use “Cnnct Phone” or
“Cnnct Audio” (or activate “Auto Cnnct”) to
connect the same device from next time on. (See
the following and pages 36 and 37.)
Deleting a registered device
Perform steps 1 and 2 on page 16, then...
1 Select “Del Pairing.”
2 Select a device you want to delete.
3 Delete the selection.
• Press number button 3 to select “No” or return to
step 1 .
Connecting a registered device
Perform steps 1 and 2 on page 16, then...
1 Select “Cnnct Phone” or “Cnnct Audio.”
2 Select a device you want.
“Connecting...” flashes, then “Connected (and
device name)” appears on the display when the
device is connected.
.
* Unele dispozitive au propriul cod PIN. Introduceţi în
aparat codul PIN specificat.
[Rotiţi]
Treceţi la numărul următor (sau anterior).
Selectaţi un număr.
Repetaţi etapele 1 şi 2 până la încheierea
procedurii de introducere a codului PIN.
Confirmaţi selectarea.
Utilizaţi dispozitivul Bluetooth ţintă, (în timp
ce mesajul „Open...” este afişat intermitent pe
ecran).
Introduceţi în dispozitivul care urmează să fie conectat
acelaşi cod PIN pe care l-aţi introdus şi în aparat.
Mesajul „Connecting...” apare intermitent, apoi este
afişat mesajul „Pairing Ok” sau „Connected [denumirea
dispozitivului]” (Conectat) atunci când conexiunea
a fost stabilită. Acum puteţi folosi dispozitivul prin
intermediul aparatului.
Când conexiunea este stabilită,
ENGLISH
17 OPERATIONS
Continued on the next page
4
Enter a PIN (Personal Identification Number)
code to the unit.
• You can enter any number you like (1-digit to
16-digit number). [Initial: 0000]
• To enter a PIN code less than 4-digit, firstly
delete the initial PIN code (0000) by pressing
number button 5 (
).
* Some devices have their own PIN code. Enter the
specified PIN code to the unit.
1 Move to the next (or previous) number
position.
2 Select a number.
3 Repeat steps 1 and 2 until you finish
entering a PIN code.
4 Confirm the entry.
5
Operate the target Bluetooth device, (while
“Open...” is flashing on the display).
On the device to be connected, enter the same PIN
code you have just entered for this unit.
“Connecting...” flashes, then “Pairing Ok” or
“Connected [Device Name]” appears on the display
when the connection is established. Now you can
use the device through the unit.
appears when the connection is established.
The device remains registered even after you
disconnect the device. Use “Cnnct Phone” or
“Cnnct Audio” (or activate “Auto Cnnct”) to
connect the same device from next time on. (See
the following and pages 36 and 37.)
Deleting a registered device
Perform steps 1 and 2 on page 16, then...
1 Select “Del Pairing.”
2 Select a device you want to delete.
3 Delete the selection.
• Press number button 3 to select “No” or return to
step 1 .
Connecting a registered device
Perform steps 1 and 2 on page 16, then...
1 Select “Cnnct Phone” or “Cnnct Audio.”
2 Select a device you want.
“Connecting...” flashes, then “Connected (and
device name)” appears on the display when the
device is connected.
va apărea pe afişaj.
Dispozitivul rămâne înregistrat chiar şi după
deconectarea acestuia. Folosiţi opţiunile „Cnnct Phone”
sau „Cnnct Audio” (sau activaţi opţiunea „Auto
Cnnct”) pentru a conecta acelaşi dispozitiv începând cu
următoarea utilizare. (Consultaţi informaţiile următoare
precum şi cele de la paginile 36 şi 37.)
Ştergerea unui dispozitiv înregistrat
Parcurgeţi etapele 1 şi 2 de la pagina 16, apoi…
Selectaţi „Del Pairing” (Ştergere conexiune).
Selectaţi dispozitivul pe care doriţi să-l ştergeţi.
[Rotiţi]
Ştergeţi selecţia.
• Apăsaţi tasta numerică 3 pentru a selecta „No” (Nu)
sau pentru a reveni la etapa 1 .
Conectarea unui dispozitiv înregistrat
Parcurgeţi etapele 1 şi 2 de la pagina 16, apoi…
Selectaţi opţiunea „Cnnct Phone” sau „Cnnct Audio.”
Selectaţi dispozitivul dorit.
[Rotiţi]
Mesajul „Connecting...” apare intermitent, apoi este
afişat mesajul „Connected [denumirea dispozitivului]”
(Conectat) atunci când conexiunea a fost stabilită.
Continuare pe pagina următoare