JVC KD-BT22 - Manual (Page 32)

ENGLISH
30
4 Press number button 1 ( ) to
move to another setting level.
4
/
¢
: select the quality of
LPF. [–12dB/oct or –24dB/oct]
Control dial: Turn the control dial to select
the subwoofer phase. [0deg (normal) or
180deg (reverse)]
* If “Off” is selected in step 2 , you can only
adjust the subwoofer phase.
C Hi Pass (Hi Pass Filter)
Turn the control dial to select the cutoff
frequency to the front/rear speakers. Set this
to match the LPF setting.
• Off: All signals are sent to the front/rear
speakers.
• 62Hz: Frequencies lower than 62 Hz are
cut off.
• 95Hz: Frequencies lower than 95 Hz are
cut off.
• 135Hz: Frequencies lower than 135 Hz are
cut off.
D VolAdjust, [–5 to +5]
Turn the control dial to adjust the input level
of each source (except FM).
Adjust to match the input level of the FM
sound level.
• Before making an adjustment, select the
source you want to adjust.
E Loudness, [Off or On]
Turn the control dial to select “Off” or
“On.” When “On” is selected, low and high
frequencies sound are boosted to produce a
well-balanced sound at low volume level.
4
Exit from the setting.
Adjusting the sound
You can adjust the sound characteristics to your
preference.
• When
is shown on the display, you can
move back to the previous screen by pressing number
button 3 or 6.
1
2
• For “EQ” setting, see page 29.
3
Adjust the selected setting item.
A Fad/Bal (Fader/Balance)
1 Press number button 1 ( )
to move to the “Fad/Bal” adjustment
display.
2 Adjust the speaker output balance by
pressing:
5
/
∞
: between the front and rear
speakers. [F6 to R6]
4
/
¢
: between the left and
right speakers. [L6 to R6]
B Subwoofer
1 Press number button 1 ( ) to
move to the “Subwoofer” adjustment
display.
2 Use
4
/
¢
to select a cutoff
frequency to the subwoofer.
• Off *: All signals are sent to the
subwoofer.
• 55Hz: Frequencies higher than 55 Hz
are cut off.
• 85Hz: Frequencies higher than 85 Hz
are cut off.
• 120Hz: Frequencies higher than 120 Hz
are cut off.
3 Turn the control dial to adjust the
subwoofer output level. [0 to 8]
Reglarea sunetului
Puteţi regla caracteristicile sunetului în funcţie de
preferinţe.
• Când pe afişaj apare
ENGLISH
9 OPERATIONS
FM station automatic presetting
— SSM (Strong-station Sequential
Memory)
You can preset up to six stations for each band.
1
While listening to an FM station...
2
3
Local FM stations with the strongest signals are
searched and stored automatically in the selected
FM band.
Manual presetting
Ex.: Storing FM station of 92.5 MHz into preset number
4 of the FM1 band.
Using the number buttons
1
2
3
Using the Preset Station list
• When is shown on the display, you can
move back to the previous screen by pressing number
button 3.
1
Follow steps 1 and 2 of “Using the number
buttons” on the left column.
• By holding
5
/
∞
, the Preset Station List will
also appear (go to step 4).
2
3
Display the Preset Station List.
4
Select the preset number you want to store
into.
• You can move to the lists of the other FM bands
by pressing number button 5 ( ) or
6 ( ) repeatedly.
5
Store the station.
Preset number flashes for a while.
Continued on the next page
, puteţi reveni la meniul
anterior dacă apăsaţi tasta numerică 3 sau 6.
• Pentru setarea „EQ”, vezi pagina 29.
Reglaţi opţiunea selectată.
Fad/Bal (Atenuator/Balans)
1 Apăsaţi tasta numerică 1 (
ENGLISH
30
4 Press number button 1 ( ) to
move to another setting level.
4
/
¢
: select the quality of
LPF. [–12dB/oct or –24dB/oct]
Control dial: Turn the control dial to select
the subwoofer phase. [0deg (normal) or
180deg (reverse)]
* If “Off” is selected in step 2 , you can only
adjust the subwoofer phase.
C Hi Pass (Hi Pass Filter)
Turn the control dial to select the cutoff
frequency to the front/rear speakers. Set this
to match the LPF setting.
• Off: All signals are sent to the front/rear
speakers.
• 62Hz: Frequencies lower than 62 Hz are
cut off.
• 95Hz: Frequencies lower than 95 Hz are
cut off.
• 135Hz: Frequencies lower than 135 Hz are
cut off.
D VolAdjust, [–5 to +5]
Turn the control dial to adjust the input level
of each source (except FM).
Adjust to match the input level of the FM
sound level.
• Before making an adjustment, select the
source you want to adjust.
E Loudness, [Off or On]
Turn the control dial to select “Off” or
“On.” When “On” is selected, low and high
frequencies sound are boosted to produce a
well-balanced sound at low volume level.
4
Exit from the setting.
Adjusting the sound
You can adjust the sound characteristics to your
preference.
• When
is shown on the display, you can
move back to the previous screen by pressing number
button 3 or 6.
1
2
• For “EQ” setting, see page 29.
3
Adjust the selected setting item.
A Fad/Bal (Fader/Balance)
1 Press number button 1 ( )
to move to the “Fad/Bal” adjustment
display.
2 Adjust the speaker output balance by
pressing:
5
/
∞
: between the front and rear
speakers. [F6 to R6]
4
/
¢
: between the left and
right speakers. [L6 to R6]
B Subwoofer
1 Press number button 1 ( ) to
move to the “Subwoofer” adjustment
display.
2 Use
4
/
¢
to select a cutoff
frequency to the subwoofer.
• Off *: All signals are sent to the
subwoofer.
• 55Hz: Frequencies higher than 55 Hz
are cut off.
• 85Hz: Frequencies higher than 85 Hz
are cut off.
• 120Hz: Frequencies higher than 120 Hz
are cut off.
3 Turn the control dial to adjust the
subwoofer output level. [0 to 8]
) pentru a
ajunge la afişajul „Fad/Bal” (Atenuator/Fader).
2 Reglaţi balansul între puterea difuzoarelor
apăsând tasta:
: între difuzoarele din faţă şi spate.
[F6 - R6]
ENGLISH
27 EXTERNAL DEVICES
Continued on the next page
Playback control from the unit
Button For iPod connected through KS-PD100 For iPod connected to the USB cable
[Press] Go to the next or previous track
[Hold] Fast-forward or reverse the track
during playback
[Press] Go to the next or previous track
[Hold] Fast-forward or reverse the track
during playback
[Press] Enter main menu when you press
5
.
Pause/resume playback when
∞
is
pressed.
[Hold] Enter main menu
[Press] Go to the top menu of “Playlists,”
“Artists,” “Albums,” “Songs,”
“Podcasts,” “Genres,” “Composers,” or
“Audiobooks” in the main menu.
• Pressing the number buttons (1 – 6)
or holding 1 (7) and 2 (8) can also
select the preset top menus.
— [Press] Pause/resume playback.
Selecting a track from the menu
No. Operation For iPod connected through
KS-PD100 For iPod connected to the USB cable
1 Enter the main
menu.
2 Select the
desired menu.
Playlists
Ô
Artists
Ô
Albums
Ô
Songs
Ô
Genres
Ô
Composers
Playlists
Ô
Artists
Ô
Albums
Ô
Songs
Ô
Podcasts
Ô
Genres
Ô
Composers
Ô
Audiobooks
3 Confirm the
selection.
• By holding
4
/
¢
, you
can fast skip during song search in the
main menu.
• By holding
¢
, you can start
play back the selected item directly.
• By holding
4
, you can go back
to the main display.
• By holding
5
/
∞
, you can fast skip in
every layer of the main menu.
• If a track is selected, playback starts automatically.
• If the selected item has another layer, you will enter the layer. Repeat steps 2 and
3 until the desired track is played.
: între difuzoarele din
stânga şi din dreapta. [L6 - R6]
Subwoofer
1 Apăsaţi tasta numerică 1 (
ENGLISH
30
4 Press number button 1 ( ) to
move to another setting level.
4
/
¢
: select the quality of
LPF. [–12dB/oct or –24dB/oct]
Control dial: Turn the control dial to select
the subwoofer phase. [0deg (normal) or
180deg (reverse)]
* If “Off” is selected in step 2 , you can only
adjust the subwoofer phase.
C Hi Pass (Hi Pass Filter)
Turn the control dial to select the cutoff
frequency to the front/rear speakers. Set this
to match the LPF setting.
• Off: All signals are sent to the front/rear
speakers.
• 62Hz: Frequencies lower than 62 Hz are
cut off.
• 95Hz: Frequencies lower than 95 Hz are
cut off.
• 135Hz: Frequencies lower than 135 Hz are
cut off.
D VolAdjust, [–5 to +5]
Turn the control dial to adjust the input level
of each source (except FM).
Adjust to match the input level of the FM
sound level.
• Before making an adjustment, select the
source you want to adjust.
E Loudness, [Off or On]
Turn the control dial to select “Off” or
“On.” When “On” is selected, low and high
frequencies sound are boosted to produce a
well-balanced sound at low volume level.
4
Exit from the setting.
Adjusting the sound
You can adjust the sound characteristics to your
preference.
• When
is shown on the display, you can
move back to the previous screen by pressing number
button 3 or 6.
1
2
• For “EQ” setting, see page 29.
3
Adjust the selected setting item.
A Fad/Bal (Fader/Balance)
1 Press number button 1 ( )
to move to the “Fad/Bal” adjustment
display.
2 Adjust the speaker output balance by
pressing:
5
/
∞
: between the front and rear
speakers. [F6 to R6]
4
/
¢
: between the left and
right speakers. [L6 to R6]
B Subwoofer
1 Press number button 1 ( ) to
move to the “Subwoofer” adjustment
display.
2 Use
4
/
¢
to select a cutoff
frequency to the subwoofer.
• Off *: All signals are sent to the
subwoofer.
• 55Hz: Frequencies higher than 55 Hz
are cut off.
• 85Hz: Frequencies higher than 85 Hz
are cut off.
• 120Hz: Frequencies higher than 120 Hz
are cut off.
3 Turn the control dial to adjust the
subwoofer output level. [0 to 8]
) pentru a
ajunge la afişajul de reglare „Subwoofer”.
2 Utilizaţi tasta
ENGLISH
27 EXTERNAL DEVICES
Continued on the next page
Playback control from the unit
Button For iPod connected through KS-PD100 For iPod connected to the USB cable
[Press] Go to the next or previous track
[Hold] Fast-forward or reverse the track
during playback
[Press] Go to the next or previous track
[Hold] Fast-forward or reverse the track
during playback
[Press] Enter main menu when you press
5
.
Pause/resume playback when
∞
is
pressed.
[Hold] Enter main menu
[Press] Go to the top menu of “Playlists,”
“Artists,” “Albums,” “Songs,”
“Podcasts,” “Genres,” “Composers,” or
“Audiobooks” in the main menu.
• Pressing the number buttons (1 – 6)
or holding 1 (7) and 2 (8) can also
select the preset top menus.
— [Press] Pause/resume playback.
Selecting a track from the menu
No. Operation For iPod connected through
KS-PD100 For iPod connected to the USB cable
1 Enter the main
menu.
2 Select the
desired menu.
Playlists
Ô
Artists
Ô
Albums
Ô
Songs
Ô
Genres
Ô
Composers
Playlists
Ô
Artists
Ô
Albums
Ô
Songs
Ô
Podcasts
Ô
Genres
Ô
Composers
Ô
Audiobooks
3 Confirm the
selection.
• By holding
4
/
¢
, you
can fast skip during song search in the
main menu.
• By holding
¢
, you can start
play back the selected item directly.
• By holding
4
, you can go back
to the main display.
• By holding
5
/
∞
, you can fast skip in
every layer of the main menu.
• If a track is selected, playback starts automatically.
• If the selected item has another layer, you will enter the layer. Repeat steps 2 and
3 until the desired track is played.
pentru a
selecta o frecvenţă-limită a subwooferului.
• Off *
(Dezactivat): toate semnalele sunt
transmise către subwoofer.
• 55Hz: Frecvenţele mai mari de 55 Hz sunt
restricţionate.
• 85Hz: Frecvenţele mai mari de 85 Hz sunt
restricţionate.
• 120Hz: Frecvenţele mai mari de 120 Hz
sunt restricţionate.
3 Rotiţi butonul de comandă pentru a regla
nivelul de redare a subwooferului. [0 - 8]
4 Apăsaţi tasta numerică 1 (
ENGLISH
30
4 Press number button 1 ( ) to
move to another setting level.
4
/
¢
: select the quality of
LPF. [–12dB/oct or –24dB/oct]
Control dial: Turn the control dial to select
the subwoofer phase. [0deg (normal) or
180deg (reverse)]
* If “Off” is selected in step 2 , you can only
adjust the subwoofer phase.
C Hi Pass (Hi Pass Filter)
Turn the control dial to select the cutoff
frequency to the front/rear speakers. Set this
to match the LPF setting.
• Off: All signals are sent to the front/rear
speakers.
• 62Hz: Frequencies lower than 62 Hz are
cut off.
• 95Hz: Frequencies lower than 95 Hz are
cut off.
• 135Hz: Frequencies lower than 135 Hz are
cut off.
D VolAdjust, [–5 to +5]
Turn the control dial to adjust the input level
of each source (except FM).
Adjust to match the input level of the FM
sound level.
• Before making an adjustment, select the
source you want to adjust.
E Loudness, [Off or On]
Turn the control dial to select “Off” or
“On.” When “On” is selected, low and high
frequencies sound are boosted to produce a
well-balanced sound at low volume level.
4
Exit from the setting.
Adjusting the sound
You can adjust the sound characteristics to your
preference.
• When
is shown on the display, you can
move back to the previous screen by pressing number
button 3 or 6.
1
2
• For “EQ” setting, see page 29.
3
Adjust the selected setting item.
A Fad/Bal (Fader/Balance)
1 Press number button 1 ( )
to move to the “Fad/Bal” adjustment
display.
2 Adjust the speaker output balance by
pressing:
5
/
∞
: between the front and rear
speakers. [F6 to R6]
4
/
¢
: between the left and
right speakers. [L6 to R6]
B Subwoofer
1 Press number button 1 ( ) to
move to the “Subwoofer” adjustment
display.
2 Use
4
/
¢
to select a cutoff
frequency to the subwoofer.
• Off *: All signals are sent to the
subwoofer.
• 55Hz: Frequencies higher than 55 Hz
are cut off.
• 85Hz: Frequencies higher than 85 Hz
are cut off.
• 120Hz: Frequencies higher than 120 Hz
are cut off.
3 Turn the control dial to adjust the
subwoofer output level. [0 to 8]
) pentru a
ajunge la alt nivel de setare.
ENGLISH
27 EXTERNAL DEVICES
Continued on the next page
Playback control from the unit
Button For iPod connected through KS-PD100 For iPod connected to the USB cable
[Press] Go to the next or previous track
[Hold] Fast-forward or reverse the track
during playback
[Press] Go to the next or previous track
[Hold] Fast-forward or reverse the track
during playback
[Press] Enter main menu when you press
5
.
Pause/resume playback when
∞
is
pressed.
[Hold] Enter main menu
[Press] Go to the top menu of “Playlists,”
“Artists,” “Albums,” “Songs,”
“Podcasts,” “Genres,” “Composers,” or
“Audiobooks” in the main menu.
• Pressing the number buttons (1 – 6)
or holding 1 (7) and 2 (8) can also
select the preset top menus.
— [Press] Pause/resume playback.
Selecting a track from the menu
No. Operation For iPod connected through
KS-PD100 For iPod connected to the USB cable
1 Enter the main
menu.
2 Select the
desired menu.
Playlists
Ô
Artists
Ô
Albums
Ô
Songs
Ô
Genres
Ô
Composers
Playlists
Ô
Artists
Ô
Albums
Ô
Songs
Ô
Podcasts
Ô
Genres
Ô
Composers
Ô
Audiobooks
3 Confirm the
selection.
• By holding
4
/
¢
, you
can fast skip during song search in the
main menu.
• By holding
¢
, you can start
play back the selected item directly.
• By holding
4
, you can go back
to the main display.
• By holding
5
/
∞
, you can fast skip in
every layer of the main menu.
• If a track is selected, playback starts automatically.
• If the selected item has another layer, you will enter the layer. Repeat steps 2 and
3 until the desired track is played.
: selectează calitatea LPF.
[–12dB/oct sau –24dB/oct]
Butonul de comandă: Rotiţi butonul de
comandă pentru a selecta faza subwooferului.
[0˚ (normal) sau 180˚ (invers)]
* Dacă în etapa 2 este selectată opţiunea
„Off” (dezactivat), puteţi regla numai faza
subwooferului.
Hi Pass (Filtru trece-sus)
Rotiţi butonul de comandă pentru a selecta
frecvenţa-limită pentru difuzoarele faţă/spate.
Efectuaţi această setare astfel încât să corespundă
setării LPF.
• Off (dezactivat): toate semnalele sunt transmise
către difuzoarele faţă/spate.
• 62Hz: frecvenţele mai mici de 62 Hz sunt
restricţionate.
• 95Hz: frecvenţele mai mici de 95 Hz sunt
restricţionate.
• 135Hz: frecvenţele mai mici de 135 Hz sunt
restricţionate.
VolAdjust, (reglare volum) [între –5 şi +5]
Rotiţi butonul de comandă pentru a regla nivelul
intrării pentru fiecare sursă (cu excepţia FM).
Efectuaţi reglarea astfel încât să corespundă
nivelului sunetului pentru FM.
• Înainte de a face o reglare, selectaţi sursa pentru
care faceţi reglajul.
Loudness, (intensitate sonoră) [Off sau On]
Rotiţi butonul de comandă pentru a selecta „Off”
sau „On.” Când se selectează funcţia „On” (activat),
intensitatea sunetului pentru frecvenţele joase sau
înalte creşte pentru a se obţine un sunet echilibrat
la un nivel redus de volum.
Ieşire din setare.