JVC 0305TNH-II-IM - Manual (Page 19)

19
Quick Setup Connections
1) Connect a yellow composite cable from the camcorder VIDEO OUT, into the VIDEO IN on
the front of the TV, OR connect an S-Video cable from the front of the TV to the camcorder.
2) Connect a white composite cable from the camcorder LEFT AUDIO OUT, into the
LEFT AUDIO IN on the front of the TV.
3) Connect a red composite cable from the camcorder RIGHT AUDIO OUT, into the
RIGHT AUDIO IN on the front of the TV.
Note:
• If your camcorder is a mono sound model it will have only one AUDIO OUT. Connect it to the
LEFT AUDIO IN on the front of the TV.
You may connect a camcorder, game console or other equipment to your television by using
the front input jacks (Input 4) located under the front panel door. To access, push on the door
to open it. You can also connect these using the television’s rear input jacks, using the same
instructions.
L/MONO-AUDIO-R S-VIDEO VIDEO
CHANNEL VOLUME POWER
OPERATE
MENU INPUT
PC INPUT
INPUT-4
POWER
OVER
OR
CAMCORDER
TV front Panel
Connecting to a Camcorder
Speaker Speaker
Amplifier
TV Rear Panel
R L
AUDIO
OUT
S-VIDEO
OVER
R AUDIO L VIDEO MONITOR/ REC OUT
1) Connect a white composite cable from the LEFT AUDIO OUTPUT on the back of the TV to
the LEFT AUDIO INPUT on the amplifier.
2) Connect a red composite cable from the RIGHT AUDIO OUTPUT on the back of the TV to
the RIGHT AUDIO INPUT on the amplifier.
Notes:
• Refer to your amplifier’s manual for more information.
• You can use AUDIO OUTPUT for your home theater system.
Connecting to an External Amplifier
PD-42X776 Eng1 19 3/24/05, 9:35:06 AM