JVC CA-MXS5RMD - Manual (Page 14)

– 11 –
Before operating the unit any further, first set the clock
built in this unit, then some other basic settings.
Turning On the Power
When you press the play button (
#/8) for a particular
source or the source selecting buttons such as FM/AM and
TAPE/AUX, the unit automatically turns on (and starts
playback if the source is ready).
• Pressing SET on the unit also turns on the unit.
To turn on the unit without playing, press so that the
STANDBY/ON lamp on the unit lights green.
To turn off the unit (on standby), press again so that
the STANDBY/ON lamp lights red.
A little power is always consumed even while the unit is in
standby mode.
To switch off the power supply completely, unplug the
AC power cord from the AC outlet.
You can change the opening or ending screen
illustrated above
Instead of showing the above opening or ending screen, you can
make your original screens. To make and store your original
screens, see “Creating Your Own Opening and Ending Screens” on
page 49.
When you unplug the AC power cord or if a power
failure occurs
The clock is reset to “0:00” right away, while the tuner preset
stations and other settings will be erased in a few days.
Setting the Clock
You can set the clock whether the unit is turned on or in
standby mode.
On the unit ONLY:
1
Press CLOCK/TIMER.
The hour digit in the main display starts flashing.
2
Push and hold the joy control rightward (
¢ ) or
leftward (
4 ) to adjust the hour, then press SET.
• If you want to correct the hour after pressing SET,
press CANCEL. The hour digit starts flashing again.
3
Push and hold the joy control rightward (
¢ ) or
leftward (
4 ) to adjust the minute, then press
SET.
“ADJUST OK!” appears in the main display, and the
built-in clock starts.
To adjust the clock again
Once you have adjusted the clock, you need to press
CLOCK/TIMER repeatedly until the CLOCK SET screen
appears in the main display (the hour digit starts flashing).
If there is a power failure
The clock loses the setting and is reset to “0:00.” You need to set
the clock again.
EN10-16.CA-MXS5RMD[B]/f 99.9.14, 1:52 AM 11