JVC CA-MXS5RMD - Manual (Page 46)

– 43 –
ALL ERASE Function
This function allows you to erase all the tracks on an MD.
• To stop any time during editing process, press EDIT.
On the unit ONLY:
1
Insert an MD you want to edit into the MD loading
slot.
2
Press EDIT.
The source is changed to “MD,” and the MD recorder
enters editing mode (with DIVIDE function selected).
3
Push the joy control downward ( 1 ) or upward
(
¡ ) to select “ALL ERASE,” then press SET.
4
Press ENTER/DEMO to erase all tracks and finish
the editing procedure.
5
Press
0 for the MD recorder to eject the MD.
“WRITING” appears while the editing you have made
is being recorded on the MD.
4
Push the joy control downward (
1 ) or upward
(
¡ ) to select the track you want to erase.
5
Press SET.
“
×
” appears between track number and track title. “
×
”
means the track in the same line will be erased when
you finish the editing procedure.
• If you have selected a wrong track number, press
CANCEL, then select the correct track number.
6
Repeat step 4 and 5 to select all the track you want
to erase.
• You can select up to 15 tracks.
7
Press ENTER/DEMO to finish selecting tracks.
8
Press ENTER/DEMO to finish the editing
procedure.
9
Press
0 for the MD recorder to eject the MD.
“WRITING” appears while the editing you have made
is being recorded on the MD.
Ex.: When you want to erase track 3
EN38-43.CA-MXS5RMD[B]/f 99.9.14, 1:54 AM 43