JVC CA-MXS5RMD - Manual (Page 34)

– 31 –
Playing at Random — Random Play
The tracks of the loaded MD will play at random.
1
Load an MD.
• If the current playing source is not the MD recorder,
press MD
# / 8, then 7 before going to the next step.
2
Press PLAY/REC MODE (or PLAY MODE on the
remote control) repeatedly until “MD RANDOM”
appears in the main display.
The RANDOM indicator also lights.
• Each time you press the button, play mode changes
as follows:
3
Press MD
# / 8.
The tracks are played at random.
Random play ends when all the tracks are played once.
To skip the playing track, push the joy control rightward
(
¢ ) or press ¢ on the remote control.
• You cannot go back to the previous tracks by pushing the
joy control leftward (
4 ) or pressing 4 on the
remote control.
To stop during play, press
7.
• Random play also stops when you eject the MD.
To exit from Random play mode, press PLAY/REC
MODE (or PLAY MODE on the remote control) once or
twice, before or after play, so that the unit enters another
playback mode (Normal play or Program play mode).
• Pressing one of the number buttons will start Normal
play from the selected track.
REPEAT ALL
REPEAT OFF
REPEAT 1
(Canceled)
Repeating Tracks — Repeat Play
You can have all the tracks, the program or the individual
track currently playing repeat as many times as you like.
On the remote control ONLY:
To repeat play, press REPEAT during or before playing.
Each time you press the button, Repeat play mode changes
and appears in the main display as follows:
REPEAT ALL: Repeats all the tracks in the MD (in
Normal play or Random play mode), or
all the tracks in the program.
REPEAT 1: Repeats one track.
REPEAT OFF: Cancels the repeat play.
Prohibiting Disc Ejection — Disc Lock
You can prohibit CD and MD ejection from the unit and
can lock discs.
On the unit ONLY:
To prohibit disc ejection, press
0 for the CD 1 tray while
holding
7 with the unit set in standby mode.
“LOCKED” appears for a while, and the loaded discs (both
CDs and MD) are locked.
If you try to eject the locked discs
“LOCKED” appears to inform you that the Disc Lock is in use.
To cancel the prohibition and unlock the discs, press
0
for the CD 1 tray while holding
7 with the unit set in
standby mode.
“UNLOCKED” appears for a while, and the loaded discs
(both CDs and MD) are unlocked.
Ex. When “REPEAT ALL” is selected
Program play
(MD PROGRAM)
Random play
(MD RANDOM)
Normal play
(MD NORMAL)
EN28-31.CA-MXS5RMD[B]/f 99.9.14, 1:53 AM 31