JVC RX-668RBK - Manual (Page 29)

26
English
6. Press
@ / # to select a
preset station number
you want.
7. Press ON SCREEN
SET to store the setting.
8. When you finish, press ON SCREEN EXIT
repeatedly until the menu disappears from the
TV.
Checking the RDS Information
(Also see page 14)
1. Press ON SCREEN SET.
2, 8, 4, and 6 buttons on the 10 keys work as % / fi / @ / # for
ON SCREEN operations.
2. Press any one of
% / fi / @ / #.
The MAIN MENU appears on the TV.
3. Press
% / fi to move
to “TUNER
CONTROL,” then press
@ / #.
The TUNER CONTROL menu appears.
4. Press
% / fi to move
to “RDS
INFORMATION,” then
press
@ / #.
The RDS INFORMATION
menu appears.
Notes:
• The on-screen display cannot show accented letters.
• RDS is not available for AM (MW/LW) broadcasts.
5. When you finish, press ON SCREEN EXIT
repeatedly until the menu disappears from the
TV.
Operating the Tuner (Also see pages 13 and 14)
1. Press ON SCREEN SET.
2, 8, 4, and 6 buttons on the 10 keys work as % / fi / @ / # for
ON SCREEN operations.
2. Press any one of
% / fi / @ / #.
The MAIN MENU appears on the TV.
3. Press
% / fi to move
to “TUNER
CONTROL,” then
press
@ / #.
The TUNER CONTROL menu
appears.
4. Press
% / fi to move
to the item you want to
set or adjust, then press
@ / #.
On the TUNER CONTROL menu, you can do the following:
“PRESET CH”: Select a preset channel station.
“BAND”: Select the band.
“FREQUENCY”: Tune in a station manually.
“FM MODE”: Select the FM reception mode.*
“PRESET MEMORY”: See “Storing the Preset Stations”
below.
“RDS INFORMATION”: See “Checking the RDS
Information” to the right.
Note:
* Not displayed when an AM (MW/LW) station is selected.
5. When you finish, press ON SCREEN EXIT
repeatedly until the menu disappears from the
TV.
Storing the Preset Stations (Also see page 13)
1. Press ON SCREEN SET.
2, 8, 4, and 6 buttons on the 10 keys work as % / fi / @ / # for
ON SCREEN operations.
2. Press any one of
% / fi / @ / #.
The MAIN MENU appears on the TV.
3. Press
% / fi to move
to “TUNER
CONTROL,” then press
@ / #.
The TUNER CONTROL menu appears.
4. Tune into a station on the TUNER CONTROL
menu, referring to “Operating the Tuner” above.
5. Press
% / fi to move
to “PRESET
MEMORY,” then press
@ / #.
The PRESET MEMORY menu
appears.
EN23_36.RX-668R[E]/2 99.1.28, 1:11 PM 26