JVC RX-668RBK - Manual (Page 33)

30
English
Search a disc by its disc title:
1. Press TEXT DISPLAY while “CD” is selected as
the source.
The Disc Information screen appears on the TV.
2. Press
% / fi to move
to “SEARCH,” then
press ON SCREEN
SET.
The DISC SEARCH screen
appears.
3. Press
% / fi to move
to “DISC TITLE”, then
press ON SCREEN
SET.
The DISC TITLE SEARCH
screen appears.
4. Press
% / fi / @ / # to move
in front of the
first character of the disc title you want to search,
then press ON SCREEN SET.
To correct the incorrect entry, press
% / fi / @ / # to move
in front of the correct character, then press ON SCREEN
SET.
Note:
Symbols such as @, # or $ cannot be available for search.
5. Press ON SCREEN
SET again.
Disc search starts, then the
SEARCH RESULT screen,
showing the disc titles,
appears.
6. On the SEARCH RESULT screen, you can do the
following:
• Changing the indication of the disc information: Press % /
fi to move to a searched disc, then press @ / #. Each
time you press
@ / #, the disc information alternates between
its disc title and its performer.
• Going to the Disc Information screen (see page 29): Press
% / fi to move
to a searched disc, then press ON
SCREEN SET.
• Showing unseen disc information (if more than 5 discs are
listed as a result of the search): Press
% / fi until they
appear.
• Going back to the DISC TITLE SEARCH screen: Press
ON SCREEN EXIT.
Searching a Disc (Only for the CD player)
Search a disc by its performer:
1. Press TEXT DISPLAY while “CD” is selected as
the source.
The Disc Information screen appears on the TV.
2. Press
% / fi to move
to “SEARCH,” then
press ON SCREEN
SET.
The DISC SEARCH screen
appears.
3. Press
% / fi to move
to “PERFORMER”,
then press ON
SCREEN SET.
The PERFORMER SEARCH
screen appears.
4. Press
% / fi / @ / # to move
in front of the
first character of the performer you want to
search, then press ON SCREEN SET.
To correct the incorrect entry, press % / fi / @ / # to move
in front of the correct character, then press ON SCREEN
SET.
Note:
Symbols such as @, # or $ cannot be available for search.
5. Press ON SCREEN
SET again.
Disc search starts, then the
SEARCH RESULT screen,
showing the performers,
appears.
6. On the SEARCH RESULT screen, you can do the
following:
• Changing the indication of the disc information: Press
% /
fi to move to a searched disc, then press @ / #. Each
time you press @ / #, the disc information alternates between
its performer and its disc title.
• Going to the Disc Information screen (see page 29): Press %
/ fi to move to a searched disc, then press ON SCREEN
SET.
• Showing unseen disc information (if more than 5 discs are
listed as a result of the search): Press % / fi until they
appear.
• Going back to the PERFORMER SEARCH screen: Press
ON SCREEN EXIT.
EN23_36.RX-668R[E]/2 99.1.28, 1:12 PM 30